Cesium FPV
Products
-
-
-
-
-
-
-
-
-
-
-
-
Alien PDB Blank - Armattan Sunk Nuts Used
$ 5.00The Alien frame requires a pdb as a brace, but if you don't need that PDB it's about 11g of dead weight. This cuts down the weight a bit and is still allows arm removal without 3d printing a nut holder or dismantling the quad.
This design is UNTESTED.
Requires 4x pressnuts (apparently you should buy a few extra press nuts because sometime the aren't threaded perfectly):
https://armattanproductions.com/pages/hardware_details/27/47
-
ImpulseRC Alien 5 PDB Replacement or Blank
$ 5.00I don't need the PDB for my Alien and that PDB weighs in at 11.6g. Removing the PDB entirely isn't really an option as the frame requires it for rigidity.
So I made this and a nut holder!
Seems to work well even in 1.5mm.
Nut holder is over at the thingiverse: https://www.thingiverse.com/thing:2521181
-
-
-
-
-
StretchBee 4mm
$ 15.00This is 3" stretch frame designed to fit in with T4B DESIGN's excellent range of products for his TOOTHRIP and TANKY offerings. It'll fit 11xx, 1304 and 1407 motors. I've only built up an 1104 build 2s build (on the 3mm version of this frame)... and as you can see from the video below - perhaps I'm a novice pilot but this lightweight form factor is PERFECT for me. It's still really fast and capable but also super super quiet. People barely notice it flying so it's perfect for backyards (even big ones). This frame should fit the slightly oversized HQ3030 3" props (but just barely).
GOING LIGHT? Try the 3mm version of this frame:
https://armattanproductions.com/pages/product_details/7562
There are lots of other options for this same form 3" quad form factor done by T4B DESIGN and perhaps more importantly, this frame was designed to fit his ecosystem of camera mounts - lots of links below:
- Version1: Tanky110 for 1306/1407 motors only (3mm thick): https://armattanproductions.com/pages/product_details/4555
- Version2: Tanky110 for 1104 to 1407 motors variable (2mm thick): https://armattanproductions.com/pages/product_details/5811
- Version3: Tanky110 for 1104 to 1407 motors variable (3mm thick): https://armattanproductions.com/pages/product_details/6743
- Version4: (insane) Toothrip110 for 1306/1407 motors (4mm thick): https://armattanproductions.com/pages/product_details/7354
- Version5: Tanky130_stretched for 1306/1407 motors (3mm thick): https://armattanproductions.com/pages/product_details/7717
- Version6: (insane) Toothrip130_streched for 1306/1407 motors (4mm thick): https://armattanproductions.com/pages/product_details/7718
Cam Pod:
- For the lowest possible profile, you can print a CMOS cam canopy.
- You can find this here: http://www.thingiverse.com/thing:1783281
- or a slightly lighter one here http://www.thingiverse.com/thing:2100233
- Version1: MicroSwift pod for Runcam MicroSwift: https://armattanproductions.com/pages/kit_detail/945
- Version2: SwiftMini pod for Runcam SwiftMini (as well as runcam owl + adapter available on thinigverse): https://armattanproductions.com/pages/kit_detail/918
- Version3: CCD Protect pod (added protection) for e.g. Runcam Swift, Owlcam Plus etc. : https://armattanproductions.com/pages/kit_detail/916
- Version4: CCD Simple pod (minimalist) for e.g. Runcam Swift, Owlcam Plus etc.: https://armattanproductions.com/pages/kit_detail/917
-
StretchBee 3mm
$ 15.00This is 3" stretch frame designed to fit in with T4B DESIGN's excellent range of products for his TOOTHRIP and TANKY offerings. It'll fit 11xx, 1304 and 1407 motors. I've only built up an 1104 build 2s build (on the 3mm version of this frame)... and as you can see from the video below - perhaps I'm a novice pilot but this lightweight form factor is PERFECT for me. It's still really fast and capable but also super super quiet. People barely notice it flying so it's perfect for backyards (even big ones). This frame should fit the slightly oversized HQ3030 3" props (but just barely).
GOING FOR 1306 or 1407? Try the 4mm version of this frame:
https://armattanproductions.com/pages/product_details/7563
There are lots of other options for this same form 3" quad form factor done by T4B DESIGN and perhaps more importantly, this frame was designed to fit his ecosystem of camera mounts - lots of links below:
- Version1: Tanky110 for 1306/1407 motors only (3mm thick): https://armattanproductions.com/pages/product_details/4555
- Version2: Tanky110 for 1104 to 1407 motors variable (2mm thick): https://armattanproductions.com/pages/product_details/5811
- Version3: Tanky110 for 1104 to 1407 motors variable (3mm thick): https://armattanproductions.com/pages/product_details/6743
- Version4: (insane) Toothrip110 for 1306/1407 motors (4mm thick): https://armattanproductions.com/pages/product_details/7354
- Version5: Tanky130_stretched for 1306/1407 motors (3mm thick): https://armattanproductions.com/pages/product_details/7717
- Version6: (insane) Toothrip130_streched for 1306/1407 motors (4mm thick): https://armattanproductions.com/pages/product_details/7718
Cam Pod:
- For the lowest possible profile, you can print a CMOS cam canopy.
- You can find this here: http://www.thingiverse.com/thing:1783281
- or a slightly lighter one here http://www.thingiverse.com/thing:2100233
- Version1: MicroSwift pod for Runcam MicroSwift: https://armattanproductions.com/pages/kit_detail/945
- Version2: SwiftMini pod for Runcam SwiftMini (as well as runcam owl + adapter available on thinigverse): https://armattanproductions.com/pages/kit_detail/918
- Version3: CCD Protect pod (added protection) for e.g. Runcam Swift, Owlcam Plus etc. : https://armattanproductions.com/pages/kit_detail/916
- Version4: CCD Simple pod (minimalist) for e.g. Runcam Swift, Owlcam Plus etc.: https://armattanproductions.com/pages/kit_detail/917
-
-
-
-
-
-
Bumblebee Antenna Protection TOP - 2mm - Experimental
$ 3.03To be used with antenna protectors. Fingers crossed this is designed right.
-
Bumblebee Antenna Protection - Experimental
$ 1.48Tolerances on this will be critical - no idea if it'll work but it's worth a try?
Requires 2 and Bumblebee top with appropirate attachement points.