T4bee Design
Welcome to T4bee Design
Full list of products (click)!
Hi, everything you see here I made because I wanted it and didn't find anywhere else. Everything is open source (non-commercial), so please feel free to download and print / cut things yourself.
Please do share your builds!
20x20mm Parakeet Frames etc.
This category contains various frames from the Parakeet made for 20x20mm sized hardware and able to fit various motors, prop sizes. It is centered around a very low profile build and the Runcam Swift Micro. All bottom plates are fully interchangable, meaning, you only need to unscrew the 4 standoff scews and your FC stack screws and plonk the entire top onto different sized or shaped mainplate.
RC goups thread for this Eco-System:
https://www.rcgroups.com/forums/showthread.php?2968166-Parakeet-Ecosystem-Quads-Hexas-2-4-100-190
Thingiverse page for this Eco-System:
https://www.thingiverse.com/thing:2472029
The way this works* is you need to buy one bottom frame of your choosing + the Topplate / Sides / Standoffs kit
(*Excep the NOX specials, which are self-contained kits with diffeent dimensions)
Some Example Pics:
Top Plate etc.
- Top Plate + Cam Protection Plates + Standoffs: kit_detail/1168
Bottom Plates
- Parakeet_100 2" Deadcat for 110X motors (3mm thick): product_details/9923
- Parakeet_114 2" True-X for 110X motors (3mm thick): product_details/9925
- Parakeet_116 2" Hexacopter for 110X motors (3mm thick): product_details/10288
- Parakeet_122 3" Deadcat for 1306/140X motors (4mm thick): product_details/9727
- Parakeet_132 3" stretched Deadcat for 1306/140X motors (4mm thick): product_details/9728
- Parakeet_144 3" True-X for 1306/140X motors (4mm thick): product_details/9729
- Parakeet_144 3" Hexacopter for 1306/140X motors (4mm thick): product_details/10989
- Parakeet_158 4" Deadcat for 1306/140X motors (4mm thick): product_details/9915
- Parakeet_190 4" stretched X for 1306/140X motors (4mm thick): product_details/9917
- Parakeet_174 4" True-X for 1306/140X motors (4mm thick): product_details/9916
NOX Specials
This special edition of the parakeet is specifically designed around the Airbot NOX32
NOTE: the NOXspecials are self-contained kits, i.e. they don't fit the other bottom plates or Top plate + sides kit !
- Parakeet_142 3" Stretched Deadcat for 1306/140X motors (4mm thick): kit_detail/1224
- Parakeet_168 4" Stretched Deadcat for 1306/140X motors (4mm thick): kit_detail/1225
For Shoes / Motor protectors + Softmounts (to be printed in TPU) go to: thingiverse.com/thing:2472029
20x20mm Pod Based Tanky & Toothrip Frames etc.
This category contans frames and pods for the Tanky & Toothrip ecosysytem of various sizes, made for 20x20mm sized hardware and able to fit various motors, prop sizes and cameras. All pods and frames are fully interchangable, i.e. you can plug any pod on any of these frames and vice versa.
RC groups link for this Eco System:
https://www.rcgroups.com/forums/showthread.php?2798066-T4bee-Tanky-Toothrip-Ecosystem-2-4
Thingiverse for this Eco-System:
https://www.thingiverse.com/thing:1783281
The way this works is you need to buy one bottom frame of your choosing + whatever Pod you like
Some Example Pics:
Carbon Fibre Pods
- CCD Protected pod (added protection) for e.g. Runcam Swift, Owlcam Plus etc. : kit_detail/916
- CCD Simple pod (minimalist) for e.g. Runcam Swift, Owlcam Plus etc.: kit_detail/917
- SwiftMini pod for Runcam SwiftMini (as well as runcam owl + adapter available on thinigverse): kit_detail/918
- MicroSwift pod Light for Runcam MicroSwift with super lightweight CF plates: kit_detail/945
- MicroSwift pod Medium for Runcam MicroSwift with medium CF plates: kit_detail/1022
- MicroSwift pod Tanky for Runcam Microswift with thick CF plates (virtually indestructible): kit_detail/1023
3D Printable Canopies
- T4bee Design Standard CMOS: fits standard CMOS cams: thingiverse.com/thing:1783281
- CaesiumFPV light CMOS: fits standard CMOS cams: thingiverse.com/thing:2100233
- JuhaFPV 35° Edition of Standard CMOS: fits standard CMOS cams: thingiverse.com/thing:2220820
4" Frames
Tanky Versions
Tanky frames are made with quite a lot of Carbon Fibre, making them virtually indestructible. I have never heard of anyone having broken one of these yet.
- Tanky_147 True-X for 1306/1407 motors (3mm thick): product_details/9965
- Tanky_184 Stretched-X for 1306/1407 motors (3mm thick): product_details/9966
- Tanky_208 Hexacopter for 1306/1407 motors (3mm thick): product_details/9967
Toothrip versions
Toothrip Frames, i.e. they're thin as toothpicks and great for ripping, are made to absolutely minimize weight and surface under the propellers. As a result, these frames are less durable than the tanky versions, but absolutely incredible to fly.
- Toothrip_147 True-X for 1306/1407 motors (4mm thick): product_details/9968
- Toothrip_184 Stretched-X for 1306/1407 motors (4mm thick): pages/product_details/9969
- Toothrip_208 Hexacopter for 1306/1407 motors (4mm thick): product_details/10310
3" Frames
Tanky Versions
Tanky frames are made with quite a lot of Carbon Fibre, making them virtually indestructible. I have never heard of anyone having broken one of these yet.
- Tanky_110 True-X for 1306/140X motors only (3mm thick): product_details/4555
- Tanky_110 True-X for 110X to 140X motors variable (2mm thick): product_details/5811
- Tanky_110 True-X for 110X to 140X motors variable (3mm thick): product_details/6743
- Tanky_130 Stretched-X for 1306/140X motors (3mm thick): product_details/7717
- Tanky_130 Stretched-X for 110X to 140X motors (3mm thick): product_details/8089
- Tanky_150 Hexacopter for 1306/140X motors (3mm thick): product_details/7476
Toothrip versions
Toothrip Frames, i.e. they're thin as toothpicks and great for ripping, are made to absolutely minimize weight and surface under the propellers. As a result, these frames are less durable than the tanky versions, but absolutely incredible to fly.
- Toothrip_110 True-X for 1306/140X motors (4mm thick): product_details/7354
- Toothrip_110 True-X for 110X to 140X motors (4mm thick): product_details/8000
- Toothrip_130 Streched-X for 1306/140X motors (4mm thick): product_details/7718
- Toothrip_130 Streched-X for 110X to 140X motors (4mm thick): product_details/8088
- Toothrip_150 Hexacopter for 1306/140X motors (4mm thick): product_details/7355
- Toothrip_150 Hexacopter for 110X to 140X motors (4mm thick): product_details/8090
For those who want to add some rigidity and introduce a planned breaking point, I have prepared CF-Crossbeams for the 3" toothrip frames. In fact, the crossbeams are highly recommended!
- Crossbeam for Toothrip_110 True-X and 1306/140X motors only (2mm thick): product_details/7951
- Crossbeam short side for Toothrip_130 Stretched-X and 1306/140X motors only (2mm thick): product_details/7950
- Crossbeam long side for Toothrip_130 Stretched-X and 1306/140X motors only (2mm thick): product_details/12464
- Crossbeam for Toothrip_150 Hexacopter and 1306/140X motors only (2mm thick): product_details/8087
In addition, Cesium FPV has remixed his own stretchbee frame version. These frames are not compatible with the cross-bars, but fully compatible with all the pods and canopies posted above.
- Cesium FPV stretchbee for 110X to 140X motors (3mm thick): product_details/7562
- Cesium FPV stretchbee for 110X to 140X motors (4mm thick): product_details/7563
2.5" Frames
Since 2.5" are significantly smaller than 3", and generally built with much lighter hardware, all frames are toothrip by default.
- Toothrip_99 True-X for 110X motors only (4mm thick): product_details/9023
- Toothrip_116 Stretched-X for 110X motors only (4mm thick): product_details/9024
- Toothrip_129 Hexacopter for 110X motors only (4mm thick): product_details/9025
2" Frames
For the same reasons as with the 2.5" frames, 2" frames are toothrip by default.
- Toothrip_87 True-X for 110X motors only (3mm thick): product_details/8150
- Toothrip_95 Stretched-X for 110X motors only (3mm thick): product_details/8151
- Toothrip_106 Hexacopter for 110X motors only (3mm): product_details/8152
For shos / motor protectors + soft mounts (to be printed in tpu) go to: thingiverse.com/thing:1783281
20x20mm Stack Frame + Pod
This is the simplest possible frame + pod for a 2" sized quad, 110X Motors and a CM275T-type AIO Cam. Tiny yet sturdy, you can't get much lighter than this.
- Stack Frame Pod for Aio Cams: kit_detail/1019
- 2" Stack_82 True-X Frame + AIO cam pod: kit_detail/1156
- 2" Stack_82 True-X Frame for 110X Motors (3mm thick): product_details/9496
- 2.5" Stack_90 True-X Frame for 110X Motors (3mm thick): product_details/9910
- 3" Stack_110 True-X Frame for 110X Motrs (4mm thick): product_details/9911
16x16mm Hardware
This category contains products made for 16x16mm hardware and various motors and cameras etc.
These frames have been designed for 16x16mm fc hardware (uses M2 screws!) and 0703/0806 brushless motors (different mountings!) and come in various sizes to provide the smallest possible frame for the respective motor and prop size.
~ !Note that 0703 and 0806 Motors use completely different mounting holes! Which means these are not interchangable. Make sure you choose the correct frame! ~
As armattan productions hardware does not feature M2 hardware, you will have to get the nylon screws and standoffs yourself.
This frame is available in the following formats:
0703 Motors:
- Micro 56 for 0703 motors and 31mm props (1.5mm thick): product_details/7427
- Micro 62 for 0703 motors and 40mm props (1.5mm thick): product_details/7428
- Micro 68 for 0703 motors and 45mm props (1.5mm thick): product_details/7429
- Micro 76 for 0703 motors and 2" props (2mm thick): product_details/7430
- Micro 80 for 0703 motors and 56mm props (2mm thick): product_details/7431
0803 Motors:
- Micro 56 for 0806 motors and 31mm props (1.5mm thick): product_details/7432
- Micro 62 for 0806 motors and 40mm props (1.5mm thick): product_details/7433
- Micro 68 for 0806 motors and 45mm props (1.5mm thick): product_details/7434
- Micro 76 for 0806 motors and 2" props (2mm thick): product_details/7435
- Micro 80 for 0806 motors and 56mm props (2mm thick): product_details/7436
The frames have been designed with the latest generation of aio cam+vtx in mind (15mm width). You have two options to mount these cameras:
- Minimalistic tiny-whoop style cam holder on thingiverse: http://www.thingiverse.com/thing:2248569
- Carbon fibre pod with adjustable angle + protection: kit_detail/926
All works are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
T4bee Design Parakeet_142 NOx32 SPECIAL stretched deadcat for 110X-140X motors 3inch props (4mm) kit
Item List
Description
This frame is the parakeet NOx32 special stretched deadcat for 110X - 140X motors, 3" props and a 4mm thick baseplate.
Since Armattan does not provide standoffs in the correct lengths, you'll have to cut the 24mm ones to 19mm to fit the swift micro protector and the 15mm ones to 14mm. Everything else *should* fit nicely, but you may need to do a tiny bit of filing to make everything slot perfectly.
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Review Section ( Total Review:0 )
No Review Found