1. Home
  2. Shop
  3. Multirotor
  4. Product

T4bee Design

Image

Visit Store

Welcome to T4bee Design

Full list of products (click)!

Hi, everything you see here I made because I wanted it and didn't find anywhere else. Everything is open source (non-commercial), so please feel free to download and print / cut things yourself.

Please do share your builds!

 

 

 

20x20mm Parakeet Frames etc.

This category contains various frames from the Parakeet made for 20x20mm sized hardware and able to fit various motors, prop sizes. It is centered around a very low profile build and the Runcam Swift Micro. All bottom plates are fully interchangable, meaning, you only need to unscrew the 4 standoff scews and your FC stack screws and plonk the entire top onto different sized or shaped mainplate.

RC goups thread for this Eco-System:
https://www.rcgroups.com/forums/showthread.php?2968166-Parakeet-Ecosystem-Quads-Hexas-2-4-100-190

Thingiverse page for this Eco-System:
https://www.thingiverse.com/thing:2472029

 

The way this works* is you need to buy one bottom frame of your choosing + the Topplate / Sides / Standoffs kit

(*Excep the NOX specials, which are self-contained kits with diffeent dimensions)

Some Example Pics:

Parakeet_142 3"
NOX Special Stretch		 Parakeet_142 3"
NOX Special Stretch		 Parakeet_158 4"
Stretched Deadcat		 Parakeet_116 2"
Hexa
Parakeet_116 2"
Hexa		 Parakeet_122 3"
Deadcat		 Parakeet_168 4"
NOX Special Stretch		 Parakeet_162 3"
Hexa
Parakeet Topplate +
Sides + Standoffs kit		 Parakeet_158 4"
Stretched Deadcat		 Shoes / Softmount Parakeet_142 3"
NOX Special Stretch

 

 

Top Plate etc.

Bottom Plates

NOX Specials

This special edition of the parakeet is specifically designed around the Airbot NOX32

NOTE: the NOXspecials are self-contained kits, i.e. they don't fit the other bottom plates or Top plate + sides kit !

  • Parakeet_142 3" Stretched Deadcat for 1306/140X motors (4mm thick): kit_detail/1224
  • Parakeet_168 4" Stretched Deadcat for 1306/140X motors (4mm thick): kit_detail/1225

 

For Shoes / Motor protectors + Softmounts (to be printed in TPU) go to: thingiverse.com/thing:2472029

 

 

20x20mm Pod Based Tanky & Toothrip Frames etc.

 

This category contans frames and pods for the Tanky & Toothrip ecosysytem of various sizes, made for 20x20mm sized hardware and able to fit various motors, prop sizes and cameras. All pods and frames are fully interchangable, i.e. you can plug any pod on any of these frames and vice versa.

RC groups link for this Eco System:
https://www.rcgroups.com/forums/showthread.php?2798066-T4bee-Tanky-Toothrip-Ecosystem-2-4

Thingiverse for this Eco-System:
https://www.thingiverse.com/thing:1783281

The way this works is you need to buy one bottom frame of your choosing + whatever Pod you like

Some Example Pics:

tanky 110 3" + micro swift pod medium toothrip 150 3" + Swift Mini Pod tanky 110 3" + Swift Mini Pod toothrip 87 2" + CMOS Canopy
toothrip 150 3" + Swift Mini Pod toothrip 110 3" tanky 110 3" + Swift Mini Pod tanky 110 3" + CMOS Canopy
toothrip 87 2" toothrip 110 3" 110X Motors tanky 110 3" + 35° CMOS Canopy tanky 147 4" + Simple CCD Pod
Tanky_147 4" + Micro Swift Pod
Medium		 toothrip_130 3" +
Micro Swift Pod Medium		 toothrip 150 3" + Swift Mini Pod + Crossbeams toothrip 110 3"  + 35° canopy
Shoes / Softmount tanky 110 3" + micro swift pod medium toothrip_110 + micro swift canopy toothrip_130 + micro swift canopy

 

 

Carbon Fibre Pods

  • CCD Protected pod (added protection) for e.g. Runcam Swift, Owlcam Plus etc. : kit_detail/916
  • CCD Simple pod (minimalist) for e.g. Runcam Swift, Owlcam Plus etc.: kit_detail/917
  • SwiftMini pod for Runcam SwiftMini (as well as runcam owl + adapter available on thinigverse): kit_detail/918
  • MicroSwift pod Light for Runcam MicroSwift with super lightweight CF plates: kit_detail/945
  • MicroSwift pod Medium for Runcam MicroSwift with medium CF plates: kit_detail/1022
  • MicroSwift pod Tanky for Runcam Microswift with thick CF plates (virtually indestructible): kit_detail/1023

3D Printable Canopies

 

4" Frames


Tanky Versions

Tanky frames are made with quite a lot of Carbon Fibre, making them virtually indestructible. I have never heard of anyone having broken one of these yet.

Toothrip versions

Toothrip Frames, i.e. they're thin as toothpicks and great for ripping, are made to absolutely minimize weight and surface under the propellers. As a result, these frames are less durable than the tanky versions, but absolutely incredible to fly.

 

3" Frames
 

Tanky Versions

Tanky frames are made with quite a lot of Carbon Fibre, making them virtually indestructible. I have never heard of anyone having broken one of these yet.

Toothrip versions

Toothrip Frames, i.e. they're thin as toothpicks and great for ripping, are made to absolutely minimize weight and surface under the propellers. As a result, these frames are less durable than the tanky versions, but absolutely incredible to fly.

For those who want to add some rigidity and introduce a planned breaking point, I have prepared CF-Crossbeams for the 3" toothrip frames. In fact, the crossbeams are highly recommended!

  • Crossbeam for Toothrip_110 True-X and 1306/140X motors only (2mm thick): product_details/7951
  • Crossbeam short side for Toothrip_130 Stretched-X and 1306/140X motors only (2mm thick): product_details/7950
  • Crossbeam long side for Toothrip_130 Stretched-X and 1306/140X motors only (2mm thick): product_details/12464
  • Crossbeam for Toothrip_150 Hexacopter and 1306/140X motors only (2mm thick): product_details/8087


In addition, Cesium FPV has remixed his own stretchbee frame version. These frames are not compatible with the cross-bars, but fully compatible with all the pods and canopies posted above.

 

2.5" Frames

Since 2.5" are significantly smaller than 3", and generally built with much lighter hardware, all frames are toothrip by default.

 

2" Frames

For the same reasons as with the 2.5" frames, 2" frames are toothrip by default.

 

For shos / motor protectors + soft mounts (to be printed in tpu) go to: thingiverse.com/thing:1783281

 

 

20x20mm Stack Frame + Pod

This is the simplest possible frame + pod for a 2" sized quad, 110X Motors and a CM275T-type AIO Cam. Tiny yet sturdy, you can't get much lighter than this.

 

 

 

16x16mm Hardware

This category contains products made for 16x16mm hardware and various motors and cameras etc.

These frames have been designed for 16x16mm fc hardware (uses M2 screws!) and 0703/0806 brushless motors (different mountings!) and come in various sizes to provide the smallest possible frame for the respective motor and prop size.

~ !Note that 0703 and 0806 Motors use completely different mounting holes! Which means these are not interchangable. Make sure you choose the correct frame! ~

As armattan productions hardware does not feature M2 hardware, you will have to get the nylon screws and standoffs yourself.

This frame is available in the following formats:

0703 Motors:

0803 Motors:

 

The frames have been designed with the latest generation of aio cam+vtx in mind (15mm width). You have two options to mount these cameras:

 

Creative Commons License
All works are licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.

Image

Wilhelm E. J. Klein

wilhelm.e.j.klein@gmail.com

Image

T4b Design Parakeet Topplate - Cam Protection - Standoffs

Price : $ 10.30
Propeller size : None

Item List

Description

This is the top-plate + cam protection sides + standoffs kit for the parakeet ecosystem.

Please note: As armattan cannot cut 90 deg. angled perfectly, you will have to do 1min of filing the edges where the sideplates slot into the main and topplate. Also, armattan does not provide the required 19mm and 18mm standoffs. Accordingly, you will have to cut the included 24mm standoffs to size.

 

 

Shop with full list of products (click here)!

Review Section ( Total Review:0 )

No Review Found

Related Products

product

CODX 240

$44.71
More Details
product

Craze 310 Frame Kit

$79.00
More Details
product

XMR Arrow Plates

$22.00
More Details