Welcome to T4bee Design

This is a Micro 80 frame for 16x16mm FC size, 0806 motors and 56mm props at 2mm carbon fibre thickness. 

This frame (and it's siblings) has been designed for 16x16mm fc hardware (uses M2 screws!) and 0703/0806 brushless motors (different mountings!) and comes in various sizes to provide the smallest possible frame for the respective motor and prop size.

~ !Note that 0703 and 0806 Motors use completely different mounting holes! Which means these are not interchangable. Make sure you choose the correct frame! ~

As armattan productions hardware does not feature M2 hardware, you will have to get the nylon screws and standoffs yourself.

This frame is available in the following formats:

0703 Motors:

• Micro 56 for 0703 motors and 31mm props (1.5mm thick): https://armattanproductions.com/pages/product_details/7789
• Micro 62 for 0703 motors and 40mm props (1.5mm thick): https://armattanproductions.com/pages/product_details/7790
• Micro 68 for 0703 motors and 45mm props (1.5mm thick): https://armattanproductions.com/pages/product_details/7791
• Micro 76 for 0703 motors and 2" props (2mm thick): https://armattanproductions.com/pages/product_details/7792
• Micro 80 for 0703 motors and 56mm props (2mm thick): https://armattanproductions.com/pages/product_details/7793

0803 Motors:

• Micro 56 for 0806 motors and 31mm props (1.5mm thick): https://armattanproductions.com/pages/product_details/7432
• Micro 62 for 0806 motors and 40mm props (1.5mm thick): https://armattanproductions.com/pages/product_details/7433
• Micro 68 for 0806 motors and 45mm props (1.5mm thick): https://armattanproductions.com/pages/product_details/7434
• Micro 76 for 0806 motors and 2" props (2mm thick): https://armattanproductions.com/pages/product_details/7435
• Micro 80 for 0806 motors and 56mm props (2mm thick): https://armattanproductions.com/pages/product_details/7436

The frames have been designed with the latest generation of aio cam+vtx in mind (15mm width). You have two options to mount these cameras:
A) a minimalistic tiny-whoop style cam holder without much protection
B) a 1mm carbon fibre pod with m2 nylon standoffs which allows you to change the angle and protects the cam

Links to the cam options:

• Minimalistic tiny-whoop style cam holder on thingiverse: http://www.thingiverse.com/thing:2248569
• Carbon fibre pod with adjustable angle + protection: https://armattanproductions.com/pages/kit_detail/926

List of potential hardware:

• tinyFISH FC: http://fishpepper.de/projects/tinyfish/
• tinyPEPPER 4in1 ESC: http://fishpepper.de/projects/tinypepper/
• Eachine EF-02 AIO 5.8G 40CH 25MW VTX: http://www.banggood.com/Eachine-EF-02-AIO-5_8G-40CH-25MW-800TVL-VTX-13-Cmos-FPV-Camera-p-1119217.html
• Frsky ultra light RX: http://www.banggood.com/FrSky-XM-2_4G-16CH-Telemetry-Receiver-p-1107435.html
• Gemfan 0806 motors: http://www.banggood.com/3B-R-0806-6200KV-7500KV-2S-FPV-Racing-Brushless-Motor-for-RC-Multicopters-p-1138409.html
• Nylon standoff set: www.banggood.com/120pcs-M2-Nylon-Hex-Spacers-Screw-Nut-Assortment-Stand-off-Accessories-Set-Kit-p-998985.html
• etc.

Some concept pictures:

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License