The DEP Abbashino is a 3" born for racing. The 4mm unibody bottom plate ensures to have as less low frequency vibration possible for an easier tuning. Stretched configuration to have the best performance at high speeds. Countersunk screw holes and chamfered edges for the best possible look.

The kit comes with everything to build the bottom+top plate frame, you can find the canopy on Thingiverse. Please notice: rear standoffs must be 25mm for the canopy to fit properly.

Fits micro FPV cameras (e.g. Runcam Racer) and 20x20mm stack. Convenient linear antenna mount to avoid it to be cut by the props.

Toothpick style frame. The DEP Toothbash can accomodate 16x16mm and 25.5x25.5mm stacks. It is compatible with most of the toothpick canopies that you can find in order to satisfy everyone's needing!

• 108mm wheelbase;
• 1:1.3 stretched configuration;
• 3mm thick Armattan carbon fiber;
• Ultralight weight, just 11g!

?Full build build including battery comes in at 115g!

Abbash improved to get the best performance ever!

Features:

• 5mm arms
• 3mm top plate - with designed mount for qT antenna installation
• coutersunk bottom plate holes - no lipo punctures!
• 20x20 holes for lightweight stacks
• nano FPV camera mounting support
• 28mm standoffs for low CG and better control
• 195mm wheelbase
• 1.08:1 stretched X configuration

[ FULL DESCRIPTION IN PROGRESS ]

All the printable components are downloadable for free from Thingiverse: https://www.thingiverse.com/thing:4622843

DEP Cinebash is a 3" cinewhoop designed to carry two GoPro Hero 8 using the 20x22 mounting pattern on the front and the back. The battery goes on the bottom so you have full space on the top.

20x20 and 30.5x30.5 mounting holes for stacks are provided. FPV cam can be mounted using standard metal brackets or the 3D printable one.

Please notice that the ducts are designed arount T-Motor F1507 motors and Gemfan Squirt 75mm props, this combination is heavily suggested for best efficiency and tight clearance with the ducts.

3D printed parts can be found on Thingiverse: https://www.thingiverse.com/thing:4915087

Born for Chasers!
Lightweight frame, designed to maximize aerodynamic with as little as possible surfaces. Interlocking arms are secured by only two screws with dedicated screws for ESC+FC allowing to use nylon bolts for reducing weight and saving the stack after crashes. Swapping a broken arm was never so easy - unscrew two bolts to free the arm and put in a new one without taking away the whole frame.

Features:

• - 98g (frame + hardware)
• - 213mm wheelbase 5.2inch propellers friendly
• - Squashed X with 1.22:1 ratio
• - 5mm arms
• - 30.5x30.5 M3 holes only
• - Micro FPV cam (19mm) mount with siide plates and DJI cam mount with TPU mounts
• - 20x20 M2 holes in the tail for Caddx Vista, IRC Ghost Hybrid or TBS Sixty9 boards
• - 30mm & 23mm standoffs for a low CG 

Printable parts can be found on Thingiverse: https://www.thingiverse.com/thing:5142948