Zappy 120 FPV frame kit

120 Frame: 3mm       5.60g    

2 x Sleds: 1.5mm       1.35g

1 x Clip:     2mm         0.35g

Total Weight 7.30g

Specs:
ESC/FC hole spacing: 16x16mm and 20x20mm
Standoff holes for M2 hardware
Note: Countersunk screws are required underneath the frame for 20x20 esc standoffs in order to clear the sleds.
Motors: 1103/1104/1105/1106
Suggested prop size: 2.5", 3"
Motor mount hole spacing: 9mm
Motor center hole diameter: 3.8mm 

Fast, very lightweight 120mm frame with super narrow arms for minimal wind resistance and thrust blockage. Very quick and agile when built light using 1103/1104/1105 high Kv motors, 300mAh 2S 45-90C Nano-tech battery, and a lightweight esc. 

Zappy 120 FPV topmount frame kit

120 Frame: 3mm       5.60g    

2 x Sleds: 1.5mm       2.08g

2 x Clip:     1.5mm      0.54g

2 x Deck:   1.5mm      1.02g

Total Weight 9.24g

Specs:
ESC/FC hole spacing: 16x16mm and 20x20mm
Note: Height under sleds is 14mm, double check stack height and or ask on the RC Groups thread for confirmation your stack will fit. Taller versions may be available in the future if demand is shown.
Standoff holes for M2 hardware
Motors: 1103/1104/1105/1106
Suggested prop size: 2.5", 3"
Motor mount hole spacing: 9mm
Motor center hole diameter: 3.8mm

Fast, very lightweight 120mm frame with super narrow arms for minimal wind resistance and thrust blockage. Very quick and agile when built light using 1103/1104/1105 high Kv motors, 300mAh 2S 45-90C Nano-tech battery, and a lightweight esc.

This kit includes the top mount sleds, deck and clips to allow for the battery or HD camera to be mounted on top of the rig. Additional benefits include more protection for stack and vtx as well as extra mounting options.

Scooter 4 inch

Ultralight 4 inch frame with arms designed to break on hard impact to protect motors.

Superlight, agile and a lovely frame to fly.

Can use 20x20mm or 30.5x30.5mm electronics.

160mm frame for 1407 or similar motors.

Comes with 2 spare arms.

Arms are 4mm thick, center plates are 1.5mm.

NOTE 1: No hardware is supplied, use 4 x M3 screws and nuts.

Motor hole spacing 12mm, holes are 2mm.

Center plate holes are 3mm for the 30.5x30.5mm ESC spacing and 2mm fo the 20x20mm ESC spacing.

Weight for the carbon parts only is approx 17gm.

NOTE 2: The kit comes with 6 arms and 2 standard center plates. There are alternate center plates available, they can be bought separately, in fact this kit can be bought as separate components if you would prefer different center plates or a different number of arms:

SCOOTER CENTER PLATE W/LUGS 1.5MM 2GM
SCOOTER CENTER PLATE FOR BATT STRAP 1.5MM 1.9GM
SCOOTER CENTER PLATE W/20X20MM 1.5MM 1.9GM
SCOOTER CENTER PLATE (STANDARD) 1.5MM 1.7GM
SCOOTER ARM 4MM 3.45GM
 

Rocket 88 R886 

super strong 5/6 inch frame

Wheelbase 220mm

30.5x30.5 or 20x20 electronics

2xxx motors (16/19mm holes)

5 or 6 inch props

6mm thick, 10mm wide arms

2mm Chassis plates

Rocket 88 R885 

super strong 5 inch frame

Wheelbase 190mm

30.5x30.5 or 20x20 electronics

2xxx motors (16/19mm holes)

5 inch props

5mm thick, 10mm wide arms

1.5mm Chassis plates

Scooter S135 3mm

The Scooter S135 is a six-piece version of the Zappy 135. The six piece version provides the ability to have (easily) replaceable arms. 

By utilising a conventional "sandwich" design, you can eat the competition for breakfast having a stronger, repairable frame with only a small weight penalty.

The design layout allows for both 16x16 and 20x20 electronics layouts using M2 hardware.

These frames are absolute jewels!

Scooter S135 2.5mm

The Scooter S135 is a six-piece version of the Zappy 135. The six piece version provides the ability to have (easily) replaceable arms. 

By utilising a conventional "sandwich" design, you can eat the competition for breakfast having a stronger, repairable frame with only a small weight penalty.

The design layout allows for both 16x16 and 20x20 electronics layouts using M2 hardware.

These frames are absolute jewels!

Scooter S120 3mm

The Scooter S120 is a six-piece version of the Zappy 120. The six piece version provides the ability to have (easily) replaceable arms. 

By utilising a conventional "sandwich" design, you can eat the competition for breakfast having a stronger, repairable frame with only a small weight penalty.

The design layout allows for both 16x16 and 20x20 electronics layouts using M2 hardware.

These frames are absolute jewels!

Scooter S120 2.5mm

The Scooter S120 is a six-piece version of the Zappy 120. The six piece version provides the ability to have (easily) replaceable arms. 

By utilising a conventional "sandwich" design, you can eat the competition for breakfast having a stronger, repairable frame with only a small weight penalty.

The design layout allows for both 16x16 and 20x20 electronics layouts using M2 hardware.

These frames are absolute jewels!

Scooter S100 3mm

The Scooter S100 is a six-piece version of the Zappy 100. The six piece version provides the ability to have (easily) replaceable arms. 

By utilising a conventional "sandwich" design, you can eat the competition for breakfast having a stronger, repairable frame with only a small weight penalty.

The design layout allows for both 16x16 and 20x20 electronics layouts using M2 hardware.

These frames are absolute jewels!