Same as the Stealth SX5 with the difference that the hole in the arm under the motors is missing.
?So watch out, not all motors will fit.

Read the discription of the stealth sx5 for the links

This is a 5 inch frame designed to fit 22xx sized motors and 20x20/30.5x30.5 electronics.
There is mounting for the Runcam/Foxeer micro and for the eachine vtx03.
The 3D parts are availeble on thingiverse.
https://www.thingiverse.com/thing:2528677

There will also be a vtx antenna mount for as you want to use a tramp or unify.

This is a 3 inch frame designed to fit 1407 sized motors and 20x20 electronics.
There is mounting for the Runcam/Foxeer micro and for the eachine vtx03.
The 3D parts are availeble on thingiverse.
https://www.thingiverse.com/thing:2528677

This is a 4 inch frame designed to fit 1407 sized motors and 20x20 electronics.
There is mounting for the Runcam/Foxeer micro and for the eachine vtx03.
The 3D parts are availeble on thingiverse.
https://www.thingiverse.com/thing:2528677

https://instagram.com/p/BY4fZRzFhWr/

The rf is a real race quad.
?It is designed to have a high topspeed and fast cornering whjat makes it an alround quadcopter.
?Thanks to the narrow arms and small mid partr it has a low drag what will result in high top speeds and the low weight will make that you can turn and accelerate and change from direction a lot faster. This combination makes the quad will be the great on all tracks.

Ad the moment you get 1 set of extra standoffs off 15mm. This is for the pod where i am working on. The pod lowers a bit more drag of the mid section and gives better protection to your fpv cam.
?It can not hold a HD cam ad the momen but for the pod and the carbon version, there will be a HD cam mount.
There will also be arm protectors. 
?If you are intertested in the extra options like the cam mount, pod and other features, contact my in Instagram or send me a mail.

The frame now comes with 2 extra arms for free.

?For more info about the pod and other parts, follow me on Instagram

The Fly X200 is a light weight frame designed for racing.

It has low drag and weight makes it very responsive, gives it a good accelaration, high top speed and fast in corners.
 

The frame withoud the pod is about 50g for the 4mm version and 57g for the 5mm version.
 

The pod is available on thingiverse.
It is now made for the runcam and foxeer cams.

http://www.thingiverse.com/thing:2285328

The Fly X200 is a light weight frame designed for racing.

It has low drag and weight makes it very responsive, gives it a good accelaration, high top speed and fast in corners.
 

The frame withoud the pod is about 50g for the 4mm version and 57g for the 5mm version.
 

The pod is available on thingiverse.
It is now made for the runcam and foxeer cams.
  

http://www.thingiverse.com/thing:2285328

The Q-SX racer

Q-SX225 Extreme
This is a frame in a line of frames that comes in different sizes.
The Q-SX225 Extreme is the base for the different versions that comes from 4 to 6 inch size with several options in thickness and with a single plate version.

The Q-SX225 Extreme is a stretched X frame with some special features. The arms are under an angle of 48 degree and the frame is stretched an extra 20mm. This way you get a stretched X frame that has more an X style arm. All the versions have the same top, fpv cam plates and standoffs.
The 4 inch version has only other size arms were the 6 inch version has a bit wider arms. This is don for more strength and that is the same for the single plate version. The 6 inch version has because of that also other bottom plates. Still all the arms will fit on each frame.

The frames are designed for racing and that is why there is a version with 3mm thick arms to get a bit lighter frame. The arms width for the 6 inch and the single plate version is 18mm, for the other versions it is 16mm to get a bit less air resistance and still be strong.
The arms and the bottom plate for the single plate are also sold separate as replacement or for as you want an other size.

The ends of the arms are designed to give some protection to your motors by a crash.

Build tips.
The frame is a tight build but thanks to the 35mm standoffs not to tight. As you want to use a big angle on the cam, than it necessary to keep the stack low.
There are 3 ways to mount the VTX antenna. This is don to give you the option to use your favorite VTX.
The fpv cam mount is made to fit an HS1177 style cam.
As you want to use a Matek style pdb with the XT60 on the side, than watch first on witch side you want the connector and place the antenna mount than on the other side.
The bottom plate with the antenna mount is the upper plate from the 2 bottom plates.
There are 16mm bolt’s with lock nuts for the pdb/fc. This is don for extra strength. Placing a pdb/fc straight on the lock nuts will not be a problem. If you don’t like that, you can ad spacers in between the lock nuts and the pdb/fc.
For the 4 inch and the 5 inch 3mm, the 11 mm are for with the lock nuts and the 12mm are for with the standoffs.
The shortest bolts are for the top plate.
For the single plate version, the pdb/fc mount is all nylon.

Q-SX225 Extreme
This is a frame in a line of frames that comes in different sizes.
The Q-SX225 Extreme is the base for the different versions that comes from 4 to 6 inch size with several options in thickness and with a single plate version.

The Q-SX225 Extreme is a stretched X frame with some special features. The arms are under an angle of 48 degree and the frame is stretched an extra 20mm. This way you get a stretched X frame that has more an X style arm. All the versions have the same top, fpv cam plates and standoffs.
The 4 inch version has only other size arms were the 6 inch version has a bit wider arms. This is don for more strength and that is the same for the single plate version. The 6 inch version has because of that also other bottom plates. Still all the arms will fit on each frame.

The frames are designed for racing and that is why there is a version with 3mm thick arms to get a bit lighter frame. The arms width for the 6 inch and the single plate version is 18mm, for the other versions it is 16mm to get a bit less air resistance and still be strong.
The arms and the bottom plate for the single plate are also sold separate as replacement or for as you want an other size.

The ends of the arms are designed to give some protection to your motors by a crash.

Build tips.
The frame is a tight build but thanks to the 35mm standoffs not to tight. As you want to use a big angle on the cam, than it necessary to keep the stack low.
There are 3 ways to mount the VTX antenna. This is don to give you the option to use your favorite VTX.
The fpv cam mount is made to fit an HS1177 style cam.
As you want to use a Matek style pdb with the XT60 on the side, than watch first on witch side you want the connector and place the antenna mount than on the other side.
The bottom plate with the antenna mount is the upper plate from the 2 bottom plates.
There are 16mm bolt’s with lock nuts for the pdb/fc. This is don for extra strength. Placing a pdb/fc straight on the lock nuts will not be a problem. If you don’t like that, you can ad spacers in between the lock nuts and the pdb/fc.
For the 4 inch and the 5 inch 3mm, the 11 mm are for with the lock nuts and the 12mm are for with the standoffs.
The shortest bolts are for the top plate.
For the single plate version, the pdb/fc mount is all nylon.

Q-SX225 Extreme
This is a frame in a line of frames that comes in different sizes.
The Q-SX225 Extreme is the base for the different versions that comes from 4 to 6 inch size with several options in thickness and with a single plate version.

The Q-SX225 Extreme is a stretched X frame with some special features. The arms are under an angle of 48 degree and the frame is stretched an extra 20mm. This way you get a stretched X frame that has more an X style arm. All the versions have the same top, fpv cam plates and standoffs.
The 4 inch version has only other size arms were the 6 inch version has a bit wider arms. This is don for more strength and that is the same for the single plate version. The 6 inch version has because of that also other bottom plates. Still all the arms will fit on each frame.

The frames are designed for racing and that is why there is a version with 3mm thick arms to get a bit lighter frame. The arms width for the 6 inch and the single plate version is 18mm, for the other versions it is 16mm to get a bit less air resistance and still be strong.
The arms and the bottom plate for the single plate are also sold separate as replacement or for as you want an other size.

The ends of the arms are designed to give some protection to your motors by a crash.

Build tips.
The frame is a tight build but thanks to the 35mm standoffs not to tight. As you want to use a big angle on the cam, than it necessary to keep the stack low.
There are 3 ways to mount the VTX antenna. This is don to give you the option to use your favorite VTX.
The fpv cam mount is made to fit an HS1177 style cam.
As you want to use a Matek style pdb with the XT60 on the side, than watch first on witch side you want the connector and place the antenna mount than on the other side.
The bottom plate with the antenna mount is the upper plate from the 2 bottom plates.
There are 16mm bolt’s with lock nuts for the pdb/fc. This is don for extra strength. Placing a pdb/fc straight on the lock nuts will not be a problem. If you don’t like that, you can ad spacers in between the lock nuts and the pdb/fc.
For the 4 inch and the 5 inch 3mm, the 11 mm are for with the lock nuts and the 12mm are for with the standoffs.
The shortest bolts are for the top plate.
For the single plate version, the pdb/fc mount is all nylon.

Q-SX225 Extreme
This is a frame in a line of frames that comes in different sizes.
The Q-SX225 Extreme is the base for the different versions that comes from 4 to 6 inch size with several options in thickness and with a single plate version.

The Q-SX225 Extreme is a stretched X frame with some special features. The arms are under an angle of 48 degree and the frame is stretched an extra 20mm. This way you get a stretched X frame that has more an X style arm. All the versions have the same top, fpv cam plates and standoffs.
The 4 inch version has only other size arms were the 6 inch version has a bit wider arms. This is don for more strength and that is the same for the single plate version. The 6 inch version has because of that also other bottom plates. Still all the arms will fit on each frame.

?The frames are designed for racing and that is why there is a version with 3mm thick arms to get a bit lighter frame. The arms width for the 6 inch and the single plate version is 18mm, for the other versions it is 16mm to get a bit less air resistance and still be strong.
The arms and the bottom plate for the single plate are also sold separate as replacement or for as you want an other size.

The ends of the arms are designed to give some protection to your motors by a crash.

Build tips.
The frame is a tight build but thanks to the 35mm standoffs not to tight. As you want to use a big angle on the cam, than it necessary to keep the stack low.
There are 3 ways to mount the VTX antenna. This is don to give you the option to use your favorite VTX.
The fpv cam mount is made to fit an HS1177 style cam.
As you want to use a Matek style pdb with the XT60 on the side, than watch first on witch side you want the connector and place the antenna mount than on the other side.
The bottom plate with the antenna mount is the upper plate from the 2 bottom plates.
There are 16mm bolt’s with lock nuts for the pdb/fc. This is don for extra strength. Placing a pdb/fc straight on the lock nuts will not be a problem. If you don’t like that, you can ad spacers in between the lock nuts and the pdb/fc.
For the 4 inch and the 5 inch 3mm, the 11 mm are for with the lock nuts and the 12mm are for with the standoffs.
The shortest bolts are for the top plate.
For the single plate version, the pdb/fc mount is all nylon.

Q-SX225 Extreme
This is a frame in a line of frames that comes in different sizes.
The Q-SX225 Extreme is the base for the different versions that comes from 4 to 6 inch size with several options in thickness and with a single plate version.

The Q-SX225 Extreme is a stretched X frame with some special features. The arms are under an angle of 48 degree and the frame is stretched an extra 20mm. This way you get a stretched X frame that has more an X style arm. All the versions have the same top, fpv cam plates and standoffs.
The 4 inch version has only other size arms were the 6 inch version has a bit wider arms. This is don for more strength and that is the same for the single plate version. The 6 inch version has because of that also other bottom plates. Still all the arms will fit on each frame.

The frames are designed for racing and that is why there is a version with 3mm thick arms to get a bit lighter frame. The arms width for the 6 inch and the single plate version is 18mm, for the other versions it is 16mm to get a bit less air resistance and still be strong.
The arms and the bottom plate for the single plate are also sold separate as replacement or for as you want an other size.

The ends of the arms are designed to give some protection to your motors by a crash.

Build tips.
The frame is a tight build but thanks to the 35mm standoffs not to tight. As you want to use a big angle on the cam, than it necessary to keep the stack low.
There are 3 ways to mount the VTX antenna. This is don to give you the option to use your favorite VTX.
The fpv cam mount is made to fit an HS1177 style cam.
As you want to use a Matek style pdb with the XT60 on the side, than watch first on witch side you want the connector and place the antenna mount than on the other side.
The bottom plate with the antenna mount is the upper plate from the 2 bottom plates.
There are 16mm bolt’s with lock nuts for the pdb/fc. This is don for extra strength. Placing a pdb/fc straight on the lock nuts will not be a problem. If you don’t like that, you can ad spacers in between the lock nuts and the pdb/fc.
For the 4 inch and the 5 inch 3mm, the 11 mm are for with the lock nuts and the 12mm are for with the standoffs.
The shortest bolts are for the top plate.
For the single plate version, the pdb/fc mount is all nylon.
 

This is een 5" stretched X frame with a very low top plate.
The frame comes with all the hardware except the FPV camera mount and optional parts, they can be found on Thingiverse. http://www.thingiverse.com/thing:2055786

The spec's.:
4mm single bottom plate
2mm top plate
25mm standoffs
FPV cam mount can be downloaded from Thingiverse http://www.thingiverse.com/thing:2055786
(Best cam to use is a HS1177 style cam because of the limited space. )

Optional:
FPV cam protector in differetn angles can be found on Thingiverse
HD cam mounts will follow soon.
The XT60 connector can be mounted to the frame with a XT60 mount that can be fount on Banggood. http://www.banggood.com/CNC-XT60-XT90-Plug-Connector-Holder-Fixture-Deck-Mount-p-961965.html?rmmds=myorder