improved version http://armattanproductions.com/pages/kit_detail/611

In this frame 3mm cf matching 3inch props. It is *pure X frame with 130mm motor to motor distance. It is designed around PIKO BLX flight controller and hs1190/1177/Swift style cameras.

-Compatible with hs1190/1177/Swift style cameras (can be fixed with 2screws through the side plates, angle from ~10 to 50+ degrees)

-Compatible only with PIKO BLX flight controller(20x20 holes spacing)

-Kit includes only carbon fieber parts, their total weight ~ 24.5 grams.

-For assembly you need four 25mm standoffs.

*Note, flight controller is moved from center to the back on 10mm.

In this frame 3mm cf matching 3inch props. It is pure X frame with 120mm motor to motor distance. It is designed around PIKO BLX flight controller and micro cmos camera with diatone mount.

-Compatible with diatone micro camera mount

-Compatible only with PIKO BLX flight controller(20x20 holes spacing)

-Kit includes only carbon fieber parts, their total weight ~ 19 grams.

-For assembly you need four 25mm or 20mm standoffs.

Improved version of the original frame (http://armattanproductions.com/pages/kit_detail/489) in terms of usability and durability.

Kit includes only CF parts

CF veight ~ 25g

For assambly you need four 25mm standoffs

Additional sideplates:

2,1mm holes, good for hs1190 cam http://armattanproductions.com/pages/product_details/5114

3.2mm holes, good for hs1170 cam http://armattanproductions.com/pages/product_details/5113

No holes, for custom drilling http://armattanproductions.com/pages/product_details/5112

In this frame 4inch props matching 4mm cf plate, it designed among piko blx flight controller(also compatible with others fc with 20x20 mounting holes spacing) and standard CCD cams. This is true X frame with 160mm diagonal, the main idea of Zerro frames is to get the most compact frame, with usability of traditional H frames where you need only unscrew 4 bolts to get to every component inside the frame. They also provided "slammed" design with 25 mm standoffs, which gives more strength to the top of the frame and also saves weight.

True X geometry, 160mm diagonal, slammed design with 25mm standoffs.

Motors: 220X (16-19mm diameter, m3 screws)

Main plate: 4mm

Flight controller: 20X20(piko blx and others)

Camera: standard 26x26 ccd(28mm distant between camera side plates)

Carbon fiber weight: ~40g

Kit includes only CF parts

For assembly you need 4 25mm standoffs(not bigger then 6mm in diameter)

Additional 3mm main plate for small motors(total cf weight ~32g) https://armattanproductions.com/pages/product_details/5746

In this frame 5inch props matching 5mm cf main plate, it designed for standard components like 30x30 flight controllers and 26x26 CCD cams(28mm distance between sideplates). This is true X frame with 200mm diagonal, the main idea of Zerro frames is to get the most compact frame, with usability of traditional H frames where you need only unscrew 4 bolts to get to every component inside the frame. They also provided "slammed" design with 25 mm standoffs, which gives more strength to the top of the frame and also saves weight.

Kit includes only CF parts

For assembly you need four 25mm standoffs

CF weight ~ 62g

Maximum cam angle ~ 50degrees

Notice: This is a really compact frame, be ready for a tight build. Try to keep your flight controller stack low, coz it can effect on maximum cam angle. This frame may not be compatible with new foxeer arrow cam wit metal body(due to lower screw holes, lower part of the cam must not be wider than 26mm)

Lighter version of Zerro 4 https://armattanproductions.com/pages/kit_detail/711

3mm main plate with m2 mounting holes for motors on 12mm to 16mm diameter.

About 8g lighter, total weight of assambled frame~35g

Kit includes only CF parts without hardware.

5 inch frame with replacement 4mm arms.

True X geometry with 200mm diagonal motor to motor dimensions.

Supports 30.5x30.5 and 20x20 flight controllers.

Supports standard CCD cams such as 1177, swift, arrow etc. 

25 mm standoffs.

Frame weight 77g with standard steel hardware, you can save about 8g using aluminium/Titanium hardware.

This is Dronehuenchures frame made in colaboration with Emil Haziev.

Kit with 5" 4mm wide arms and split deck

-For assambly you need 4x20mm and 3x25mm standoffs

-sunknuts included

-Compatible cameras: mini and micro(requires 1.5mm M2 washer on both side of the camera)

-Weight ~90g with steel hardware

-214mm diagomal motor to motor distance

Note: 5" 5mm arms are skinny and not fully compatible with this kit (you can still use them)

Work in progress

This is Dronehuenchures frame made in colaboration with Emil Haziev.

Kit with 5" 5mm skiny arms and split deck (requires advanced hardware*)

-For assambly you need  4x20mm and 3x27mm standoffs*

-sunknuts included

-Compatible cameras: mini and micro(requires 1.5mm M2 washer on both side of the camera)

-Weight ~90g with steel hardware

-214mm diagomal motor to motor distance

Note: 5" 4mm arms are wider and not fully compatible with this kit (you can still use them)

Work in progress