1. Home
  2. Shop
  3. Hydra Designs
  4. Matthew Sorrentino

Matthew Sorrentino

Image

.....
Image

Hydra Designs

Visit Store

Kits

  • Kit
    More Details

    HYDRA 185X
    $ 40.00

    Description

    The HYDRA 185X frame is 185mm motor to motor and fits 5" props for 22xx motors. This frame is in an TRUE X configuration. It is incredibly agile and flies like it's on rails. I designed a 3D printed pod to house all your important gear with easy access. This pod allows the antenna to stick straigh out the back instead of the dreaded straight up style top plates where your antenna gets bashed everytime you crash. Every piece of equipment has a place to be housed (no more guessing where to put your gear)! This frame is extremely light but strong in all the right places.

     

    • 3K Matte Carbon Fiber frame featuring a 4mm thick "Unibody" bottom plate ( 2mm top plate ).
    • M3 motor mounting patterns.
    • Carbon Fiber extends past motors to help protect in crash.
    • Supports 26mm cams in cases (HS1177)
    • Supports HD camera (GoPro, Xiaomi Yi)
    • Supports Naze32 Flight controllers and others alike ( Kiss, Cyclone, Tornado F3, DoDo, SP Racing F3, Ect )

    Recommended Setup

    • 2205 2300kv/2600kv size motors with M3 16x19mm mounting pattern
    • 20-30A ESCs
    • 5” props
    • 3-4S power, 1300-1800mAh capacity batteries
    • Mini CCD camera with tilt bracket

     

     Includes
    • 4mm 3k Matte Carbon Fiber bottom plate
    • 2mm 3k Matte Carbon Fiber top plate
    • 3D pod STL file for you to get printed ( I use 3D hubs for this ) Please email me for STL file. Should fit over most FC but may need to be modified to fit (Tested on Cyclone and EvoF3)

     

     Specifications

     

    • Frame Weight: TBD
    • VTX WILL NEED PIGTAIL WITH RIGHT SMA/RP-SMA TO WORK WITH POD DESIGN. YOU COULD EITHER SOLDER ON PIGTAIL LIKE I DO OR BUY A PIGTAIL EXTENSION.
  • Kit
    More Details

    ACHILLES 210 4mm BOTTOM PLATE
    $ 38.99

    SPARE REV 2 4mm BOTTOM PLATE

  • Kit
    More Details

    ACHILLES 210 1.5mm TOP PLATE
    $ 12.99

    SPARE REV 2 1.5mm TOP PLATE

  • Kit
    More Details

    ACHILLES 210 3mm BOTTOM PLATE
    $ 32.99

    REV 2 SPARE 3MM BOTTOM PLATE

  • Kit
    More Details

    ACHILLES 210 FRAME KIT
    $ 51.81

    Description

    The Achilles frame is 210mm motor to motor and fits 5" props for 22xx motors. This frame is in an X configuration, but not quite a true X. This frame is a serious race frame and with the combination of the X style and extremely lightweight frame, it is incredibly agile and flies like it's on rails. I designed this frame to house all of your gear with multiple points for straps and zip ties. Every piece of equipment has a place to be housed (no more guessing where to put your gear)! This frame is extremely light but strong in all the right places.

     

    • 3K Matte Carbon Fiber frame featuring a 3mm thick "Unibody" bottom plate ( 1.5mm top plate ).
    • M3 motor mounting patterns.
    • Carbon Fiber extends past motors to help protect in crash.
    • Supports 26mm cams in cases ( Should support 31mm cams such as the RunCam 31mm x 31mm, will update as soon as I receive the frame)
    • Supports HD camera (GoPro, Xiaomi Yi)
    • Supports Naze32 Flight controllers and others alike ( Tornado F3, DoDo, SP Racing F3, Ect )

    Recommended Setup

    • 2204-2208 size motors with M3 16x19mm mounting pattern
    • 12-18A ESCs
    • 5” props
    • 3-4S power, 1300-1800mAh capacity batteries
    • Mini CCD camera with tilt bracket

     

     Includes
    • 3mm 3k Matte Carbon Fiber bottom plate
    • 1.5mm 3k Matte Carbon Fiber top plate
    • 8 - 35mm black anodized aluminum standoffs
    • 18 - 8mm  black anodized bolts

     

     Specifications
    • Frame Weight: 75g (without standoffs)
    • Frame Size: 210mm (diagonal motor to motor)