DronerFPV designed with Armattan Productions a 3.5 inch Armattan Tadpole main and LiPo plate.

For this design, we redesigned for:

9mm motor mount pattern with increased area around the motor mounts for more crashing beefyness. Used the Emax 1404 3600kv 6S for zippyness and longer flight time.
You can use the GEPRC or Tadpole (with spacers) camera mounts
2-23mm rear stand-offs which allow for a TPU antenna and crossfire mount

DronerFPV designed with Armattan Productions a 3.5 inch Armattan Tadpole main and LiPo plate.

For this design, we redesigned for:

12mm motor mount pattern with increased area around the motor mounts for more crashing beefyness. Used the BetaFPV 1404 3800kv for zippyness and longer flight time.
You can use the GEPRC or Tadpole (with spacers) camera mounts
2-23mm rear stand-offs which allow for a TPU antenna and crossfire mount
 

Introducing the Armattan Gecko DJI 3.5 inch Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 12mm motor mount pattern for 4s-6s 1505, 1606, 1808, 2004 or even 2203.5 motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Gecko 3 or 4 inch and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Vista or Caddx Polar with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 3.5 inch Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 9mm motor mount pattern for 4s-6s 1505, 1606, 1808, 2004 or even 2203.5 motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Vista or Caddx Polar with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 3.5 inch Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 12mm motor mount pattern for 4s-6s 1505, 1606, 1808, 2004 or even 2203.5 motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Vista or Caddx Polar with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 3" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 9mm motor mount pattern for 4s-6s 1404 motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Vista or Caddx Polar with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 3" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 12mm motor mount pattern for 4s 15xx, 16xx, 18xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Vista or Caddx Polar with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

DronerFPV designed with Armattan Productions to replace the existing Armattan Gecko 4 inch main plate with a ultralight weight frame and Lipo plate to feel more like a toothpick or 5-inch freestyle frame with more agility, zippiness and flight time. 

The lighter weight 3mm frame allows you to mount the lighter weight 1.5mm shaft motors like 1505, 1606, 1805, or 2004 motors coupled with a longer LiPo plate makes it perfect for carrying a lightweigth HD camera, like the Insta360 GO, Insta360 GO2, BetaFPV SMO4K, GEPRC GoPro 8 or Naked GoPro to capture your freestyle footage in HD.

New Frame Conversion Kit Includes

• 1 x Armattan Gecko DJI Ultralight 4-inch Caddx Vista - Conversion Kit - 20x20 flight controller and 3mm plate thickness with 12mm motor mounts (Main Plate).
• 1 x Armattan Gecko Extended LiPo Plate 
• Main and LiPo Plate ONLY - Conversion kit does NOT include front Gecko camera mount, hardware or back standoffs 

Frame Specifications and Electronics

• Main Plate Weight: xx.0 grams
• Motor to Motor: xxx.00mm
• Frame Shape: Compressed X
• Main Plate Thickness: 3mm
• Hardware: M2/M3
• Motor Mount Pattern: 12mm - BetaFPV 1505 , 1606, 1805, or 2004
• FC Stack Mount: 20x20
• FPV Camera Mount: Micro (19mm)
• FPV Antenna Mounts: Stand-offs (2-23mm)
• TBS Immortal-T Mount: TPU 
• Increased Max FC Stack Height: 23mm
• Recommended 4s-6s LiPo 650 mAh - 850mAh

When Assembled the Frame Features

• 4-inch props
• Top-mounted LiPo.
• Armattan custom aluminum front cage fully protecting a micro cam (add 2-spacers for height)
• 2-23mm rear stand-offs to maintain max height for 20x20 FC Stack 

Introducing the Armattan Tadpole 2.5" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 9mm motor mount pattern for 4s or 6s 14xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new HD one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole 2.5" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 12mm motor mount pattern for 4s 14xx-15xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new HD one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole 3" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 9mm motor mount pattern for 4s 14xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new HD one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole 3" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 12mm motor mount pattern for 4s 14xx-15xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new HD one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 3" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 9mm motor mount pattern for 4s or 6s 14xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Nebula with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 2.5" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 12mm motor mount pattern for 4s 14xx-15xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Nebula with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 3" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 9mm motor mount pattern for 4s or 6s 14xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Nebula with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Tadpole DJI 3" Main Plate conversion kit. Featuring a 3mm main plate designed for a 20x20 flight controller with 12mm motor mount pattern for 4s 14xx-15xx motors (crazy fast and agile). 

DronerFPV designed with Armattan Productions to replace the existing Armattan Tadpole 3 inch 2mm 16x16 FC main plate and feel more like a 5-inch freestyle frame with more agility, zippiness and flight time. The LIPO plate sits taller with the use of 2-20mm standoffs on the back to allow for the addition of the Caddx Nebula with plenty of room and is also longer to hold 650mAh batteries. You can also add 1.5mm standoffs in front to increase the height with the existing camera bracket or use the new one. 

The added stability, motor and battery size make it perfect for carrying the extra weight of a Naked GoPro, SMO4K or Insta360 GO2 or GO to capture your freestyle footage in HD. 

Introducing the Armattan Rooster DJI conversion kit for DJI Caddx Vista. We modified the center plate to fit the DJI Caddx Vista and increased the length of the LiPo plate to use the Marmotte LiPo pad to hold a larger battery. 

The result is a Rooster that appears to be have been designed around the DJI technology with all the goodness of Armattan’s analog Rooster design.