not tested yet

THIS KIT HAS NOT BEEN TESTED

THIS KIT IS CARBON FIBER ONLY.  HARDWARE, ROOSTER CAGE, AND OTHER STANDARD ROOSTER PARTS MUST BE PURCHASED SEPARATELY FROM ARMATTAN QUADS.

The Rooster base has been stretched to allow for a longer battery.  The top plate is now 133mm long.

To complete this build, you will need the following components:

(1) http://www.armattanquads.com/28-6mm-standoff-for-the-armattan-rooster-frame/

(1) http://www.armattanquads.com/rooster-lr-long-range-plate/

(2) http://www.armattanquads.com/rooster-rear-post/

(1) http://www.armattanquads.com/rooster-hd-cam-plate/

(2) http://www.armattanquads.com/rooster-titanium-cam-brace/

(2) http://www.armattanquads.com/16mm-m3-f-f-alumi-tapped-standoff-spacer-black-anodized-5-5mm-o-d/

(1) http://www.armattanquads.com/6mm-m3-class-12-9-steel-button-head-screw-black-anodized-10-pieces/

(1) http://www.armattanquads.com/8mm-m3-class-12-9-steel-button-head-screw-black-anodized-10-pieces/

(1) http://www.armattanquads.com/12mm-m3-steel-button-head-screw-black-anodized-10-pieces/

(1) http://www.armattanquads.com/16mm-m3-steel-button-head-screw-black-anodized-10-pieces/

(1) http://www.armattanquads.com/m3-nylon-insert-nut-black-anodized-nylock-lock-nut-10-pieces/

CHOOSE YOUR ARM LENGTH - buy 5 and 6" arms from Armattan Quads.  Buy 7" arms from my store.

Requires hardware and a camera mount. Camera mount requires 5mm OD standoffs.

You will need the runcam micro mount and the vtx antenna mount from this mount. The runcam mini mount is not guaranteed to fit, especially at low tilt.

https://www.thingiverse.com/thing:2491488/#files

Hardware needed:

4x20mm m3 standoffs

4x6mm m3 screws

4x10mm m3 screws

4x m3 lock nuts

4x m3 screws for arms - length depends on height of lock nuts used 8-10mm

5mm m3 screws are needed for the motors. Most motors only come with 6mm.

Requires hardware and a camera mount. Camera mount requires 5mm OD standoffs.

You will need the runcam micro mount and the vtx antenna mount from this mount. The runcam mini mount is not guaranteed to fit, especially at low tilt.

https://www.thingiverse.com/thing:2491488/#files

Hardware needed:

4x20mm m3 standoffs

4x6mm m3 screws

4x8mm m3 screws

8x m3 lock nuts

8x m3 screws for arms - length depends on height of lock nuts used 8-10mm

5mm m3 screws are needed for the motors. Most motors only come with 6mm.

THIS IS NOT A WARRANTIED FRAME!!!!

This kit is for the Main Plate and Top Plate Carbon Fiber ONLY.  You will need to source the front and rear aluminum as well as the camera side plates from Armattanquads.com.  Make sure to purchase hardware as well.

Additional Hardware needed:

2x 20mm aluminum standoffs

2x countersunk m3 screws (6-10mm)

2x standard m3 screws (8-10mm)

the 30mm standoffs need to be filed down to 28mm for the front standoff.

This is a 225mm MTM stretched X frame with 4mm main plate and 1.5mm top plate and cam braces.

http://rotorbuilds.com/build/956

This is a 220mm MTM quadcopter designed for 5" props.  Main plate and arms are 3mm thick.  Bottom plate is 1.5mm thick.  Side plates are 2mm thick.  Utilizes the V3 cam brace technology from Armattan that you will see on the SCX frames.  Offers 80+deg of tilt on FPV camera.  Integrated HD Camera Mount at 45deg will fit Mobius style or GoPro Session Camera.  Frame weighs under 100g with the provided hardware.

http://www.rcgroups.com/forums/showthread.php?t=2699592

Recommended Parts:

PowerOSD/RROSD combination PDB and OSD

Motolabs Cyclone F3 Processor capable of 8k/8k/8k with the correct ESC

F39x ESC's 20-30A - I like the MassiveRC F390 ESC's due to the price and small size.

Emax Redbottom 2205 2300kV or similar motors

X4R-SB Rx

Hawkeye/UBAD 200mW VTx with pigtail

Right angle SMA adapter

TBS Triumph Antenna

HS1177 Camera