Requires hardware and a camera mount. Camera mount requires 5mm OD standoffs.
You will need the runcam micro mount and the vtx antenna mount from this mount. The runcam mini mount is not guaranteed to fit, especially at low tilt.
4x20mm m3 standoffs
4x6mm m3 screws
4x8mm m3 screws
8x m3 lock nuts
8x m3 screws for arms - length depends on height of lock nuts used 8-10mm
5mm m3 screws are needed for the motors. Most motors only come with 6mm.
Review Section ( Total Review:0 )
No Review Found