DRANIK Stretch X 210 frame.

I made this frame with the idea of using micro cameras and 20x20 stack. At the same time I wanted to make the camera protected as possible and make frame not very heavy. As it seems to me it turned out not bad :)

Size: stretch x 210mm

Weight: ~60g

The frame consists of:
- lower plate 3 mm
- top plate 2 mm
- side plates 2 mm
- Arm 4 mm thick and 10 mm width
Note Hardware are not included

I recommend buying bolts and standoffs by yourself, to choose your favorite color, as well as bolts and nuts. List of used by me:

- M3 Flange Nylon Nut

- M3 20mm Knurled Standoff 

Part list wich I use to buil this frame:

- Flight controller - OMNIBUS F4 Nano v5 

- ESC - Ori32 4in1 ESC 4x25A 

- Motors - I use ZMX FINX23. This is interesting motors, light, powerful but unfortunately not very durable.

- Camera - Foxeer Arrow Micro , or you can try this Foxeer Predator micro V2 

- Reciver - FrSky r-xsr, You can try another receiver, but there is not much room in the frame, with larger ones there may be difficulties in placing

- VTX - FuriousFPV STEALTH , or TBS nano 

- VTX antenna - FuriousFPV BigMac , I like this antenas

- Battery Strap

Also, I made several options for mounting antennas (furiousfpv bigmac and AXII) for printing on a 3d printer. Best print int from TPU plastic. will upload soon

DRANIK Stretch X 210 frame.

I made this frame with the idea of using micro cameras and parts under a 20x20 stack. At the same time I wanted to make the camera as secure as possible and the frame not very heavy. As it seems to me it turned out not bad :)

The frame consists of:
- lower plate 3 mm
- top plate 2 mm
- side plates 2 mm
- Arm 4 mm thick and 10 mm width
- bolts and standoffs

But I recommend buying bolts and standoffs by yourself, to choose your favorite color, as well as bolts and nuts. List of used by me:

- M3 Flange Nylon Nut https://goo.gl/DXy8ie

- M3 20mm Knurled Standoff https://goo.gl/ykwbm8

Part list wich I use to buil this frame:

- Flight controller - OMNIBUS F4 Nano v5 https://store.myairbot.com/flight-controller/omnibus-f3-f4/omnibusf4nanov5.html

- ESC - Ori32 4in1 ESC 4x25A https://store.myairbot.com/esc/ori324in14x25a.html

- Motors - I use ZMX FINX23 http://pirofliprc.com/ZMX-FINX23-FR05-26K-IJN-UMIKAZE-Motor_p_4403.html . This is interesting motors, light, powerful but unfortunately not very durable.

- Camera - Foxeer Arrow Micro https://goo.gl/ai892J , or you can try this https://goo.gl/n1EA9W

- Reciver - FrSky r-xsr https://goo.gl/KuH3zb, You can try another receiver, but there is not much room in the frame, with larger ones there may be difficulties in placing

- VTX - FuriousFPV STEALTH  https://goo.gl/haeLzj , ore TBS nano 

- VTX antenna FuriousFPV BigMac https://goo.gl/qiiG8B , I like this antenas

Also, I made several options for mounting antennas (furiousfpv bigmac and AXII) for printing on a 3d printer. Best print int from TPU plastic. will upload soon