NDMCN

Kits

  • product
    More Details

    BUG 180 v2 Tough

    $ 28.67

    I design it for myself but why not share ?
    Every holes calculated for your electronics.
    You can easly switch and see your channel if you mount your transmitter to top plate with some cable tie!
    22 or 18 motor supports HD cam mounting holes ok!
    what do you want more ! TRY THIS NOW

    recomended electronics
    motor 22xx
    esc 20A+
    FC: F3
    4s 1300 mah 65C

    FPV
    TS5823 or f*xx*r and all camera with mounthing parts !

    JUST ZIP THEM ALL !

  • product
    More Details

    BUG 215 v2 Tough

    $ 33.67

    I design it for myself but why not share ?
    Every holes calculated for your electronics.
    You can easly switch and see your channel if you mount your transmitter to top plate with some cable tie!
    Now you can use 5" props and change your arms quickly
    22 or 18 motor supports HD cam mounting holes ok!
    what do you want more ! TRY THIS NOW

    recomended electronics
    motor 22xx
    esc 20A+
    FC: F3
    4s 1300 mah 65C

    FPV
    TS5823 or f*xx*r and all camera with mounthing parts !

    JUST ZIP THEM ALL !
     

  • product
    More Details

    Edge 100X

    $ 11.01

    micro and tiny design for your new 3" quadcopter
    also you can fix your 30.5*30.5 standart controller or mini 20*20 controller.

    Cheap and sturdy solution for you and me

    I design it for myself ,if you give me info or question about that product i can modify for being better it will be cheap everytime.

  • product
    More Details

    Edge 100X 3MM

    $ 13.51

    micro and tiny design for your new 3" quadcopter with 3mm base plate
    also you can fix your 30.5*30.5 standart controller or mini 20*20 controller.

    Cheap and sturdy solution for you and me

    I design it for myself, if you give me info or question about that product i can modify for being better it will be cheap everytime.

  • product
    More Details

    Edge 100x V11xx CARBON ONLY

    $ 12.49

    It is light version of EDGE100x for 11xx motor
    20*20 controller will fit basicly also bigger controller will fit inside but there is not spacer mount for 30.5*30.5 controller
    this kit just include carbonfiber parts
    you can find spare parts in my shop
    I design it for myself, if you give me info or question about that product i can modify for being better it will be cheap everytime.

  • product
    More Details

    NBX 200 Carbon only

    $ 37.49

    2mm main plates sandwich design with 3mm arms and 2mm top plate

    -True X design
    -200 mm motor to motor dimension
    -Support 5" props
    -Designed with motor bumper on arms
    -Electronics fit inside easily

    45.25mm free space between spacers so you have huge area for your electronics 

  • product
    More Details

    NBX 200 flat bottom Carbon only

    $ 42.49

    Flat bottom NBX frame
    include :
    4mm bottom
    2mm top plate

    -True X design
    -200 mm motor to motor dimension
    -Support 5" props
    -Designed with motor bumper on arms
    -Electronics fit inside easily

    45.25mm free space between spacers so you have huge area for your electronics 

  • product
    More Details

    TOXIC WALTZ 200mm (Chefs Special)

    $ 24.99

    DISCOUNTED PRICE FOR PROMOTION 

    Toxic Waltz Frame Kit
    Calculated weight about 35-45 gr. (carbon only)

    This kit include
    1x Main plate
    1x Top plate
    6x Arm
    and screws, bolts, spacers all your needs for that frame with spares.

    True X 
    200mm ultralight extreme racing frame !

    The main plate has duplicated 20*20 mm and standart FC mount holes so you can mount your FC on center of the frame for easier PID tuning or a few mm behind from center for more free space inside. Also this main plate has holes for pass through the cables so when you break an arm your solder pads will be still good, the tension will stop on cables and frame.
    When i design this plate, i analyze it and strengthen it so when you crash somewhere arm would be break first, this impact will absorb energy and your main plate will be still perfect.

    The top plate also has duplicated 20*20 mm and standart FC mount holes and battery strap holes so you can mount your fc upside if you want (usefull when you build it low) and your battery on the frame

    This arm has 19mm between motor mount holes as every 22** - 23** motors has.
     This arm is designed to sacrifice itself, if something will break anyway. But still it dont have any weak spot, this is the best shape of 5 grams of carbon fiber.

  • product
    More Details

    N0085 M8

    $ 56.27

    N0085 M8 (Noobs Mate but cooler if you say only numbers. Thrust me i am an engineer !)

    Now you know how engineers name the things. Lets talk about the frame.

    Designed for the FPV folks who want to try that move, that you know you will probably crash it.
    Don't hessitate #sendit !
     

    -Fundamental Informations-

    +220mm Motor to Motor diameter

    +True X design

    +5.1" props are compatible. 6" arms are will be avaible soon.

    +115-120 grams only carbon weight
     

    -Technical Design Informations-

    +This frame designed for extreme freestyle crashes. With side walls and all of the 8 spacers the electronics inside the body will stay in their places. You need to fit tightly side walls to their places. They are structural elements so i recommend to dont sand them too much while building it.

    +Spacer and screw contact surfaces on the carbon fibre are enlarged so there is more place to distribute stress. 

    +You can mount a GoPro on top of the frame. 3D STL files are will be avaible soon

    +Arms are mounted with sandwich method. Also they are supporting each other in the middle of the frame. They are also easy to replace after really hard bando crashes.

    +Arms are designed as a motor guard.

    +As you see in my render you can fit a DJI HD unit inside the frame. Also other HD transmitters will fit without any problem such as Caddx Vista or Nebula.

    + It has 20*20 and 30*30 standart flight controller mount holes in the middle section off the frame and one more hole for the outter spacers.

    +It also has 20*20 mount holes on the Front and Back Side Walls in case of you want to mount something there such as FPV transmitters.

    +FPV camera mount dimension is 22mm so HD cameras are also welcome and analog cameras will fit as standart

    +I did not try to lighten the frame all parts are 2mm except arms they are 4mm. This way you will not see any weak point on the frame.

     

    -Customization-

    +This frame is symmetrical from center so if you don't need much space between your camera and flight controller you can mount the camera on the 26mm side wall and rotate the top plate. This way you will have a huge back area that you can even mount a 20*20 FC or caddx Vista verticaly to the 32mm side plate

    +This frame allows you to use the Source One arms in case you want to customize it.

    +You can also add 4 more spacer to this frame, their holes are positioned behind side walls.


    Please feel free to contact me if you want to ask or need something such as 3d printing STL
    I hope you will also enjoy this frame. I was really enjoyed while designing it. It was a challenge i was planning for a while.
    Now you can have it !
    Have a nice flight.

Products