RotorMunkey Quads




o7 Fy Safe! 

Maiden 50XX img




Cremling


Price : $ 9.00

Propeller size : 2"



Item List

Description

Description

The Cremling is a double or single stack 2" micro. 

I wanted to revisit the Rupee design to allow for greater flexibility, and decided to bump up to a 2" frame, due to more readily available and varied props. After several iterations, the Cremling is what I ended up with.

The Main Plate has space enough for 2 side-by-side 16mm stacks below the plate, or above (if prop clearance allows), a sinlge 16mm stack in the middle, or both! there should be enough clearance to fit a 16mm stack on one side, as well as double stack on the opposite side of the Main Plate.

The Skid Plate is meant to mount below the Main Plate, either to cover the stacks, or provide a nice space for the battery to fit into.

The Rotor Guard Can is designed to be used with a single stack on top of the Main Plate, but could help provide some protection for the props or whatever you may run into. It is rather expensive though, due to the large footprint I can only assume. That said, this kit is a bit discounted from buying the plates seperately ($24)

Armattan Prodecutions does not offer much in the way of M2 hardware, so you will need to source standoffs and M2 bolts for the motors elsewhere.


Options

Cremling

Cremling W Battery Tabs

Cremling W Rotor Guards

Cremling W Rotor Guards and Battery Tabs


3D Parts

This Thingiverse Page will feature all the designs I have come up with for Camera Mounting, and other options. If you have any ideas or requests, feel free to contact me through the RotorMunkey Quads Facebook page, or by email, if you are not on Facebook.

This CM275T Camera Mount from FlexRC.com should work nicely for a center mounted AIO Camera.

This Eachine TX02 Mount, designed by Bankboom on Thingiverse, will fit for a center mount.

Additional Information



IMG PH

Review Section ( Total Review:0 )

No Review Found