Kit Includes TF165HEX main plate for hexacopter, top plate, 16mm standoffs and screws, and standoffs to mount PikoBLX FC.

Supports 1304 motors 3" props and Piko BLX FC.

Buyers interested in pictured TPU AIO Camera Mount, please email me for details, as it's not available through this site. If you buy this kit, I will send you one for free if you're in the US. International buyers who want one will have to cover USPS First Class International postage. This mount is specifcally designed for the Boldclash F-03 AIO Camera/VTX, which handles 3-26v and is switchable 25mw/200mw.

No Hardware. Purchases in the US, please email me for a TPU AIO camera pod.

This kit includes the main plate of frame and top plate as well as mounting hardware for PIKOBLX FC.

IMPORTANT: You will need to source M2 screws and standoffs to complete this kit to support top plate. I recommend 12mm M2 standoffs

Screw holes for motors will support 1304s but motors will overhang the mounts on the outside by approxiately 1.5mm on side and you will need to countersink center hole slightly.

US Buyers, please email me for info on AIO/VTX Camera Mount and m2 hardware. folmermultirotor@gmail.com

TF-110 110m for 1104/1105 motors and PikoBLX FC

Kit features 110mm true X frame, Standoffs for PikoBLX FC, stackable Top Plate, screws and nuts.

Big thanks to IAN444 for his original design.

This kit includes the main plate of frame and top plate, standoffs to support top plate, screws, standoffs for PikoBLX FC.

Will fit 1104/1105/1304 motors with adequate protection around motors.

IMPORTANT!! For 1304 Motors, you will need to countersink center hole on motor mounts!

For this build, I'd recommend 1304 motors, 20a ESCs, PikoBLX FC, HQ3030 props on 4s.

I have not tested this frame, but have flown the m2 version and it's a beast.

This kit includes the main plate of frame and top plate.

IMPORTANT: You will need to source M2 screws and standoffs to complete this kit to support top plate. I recommend 12mm M2 standsoffs. If you don't want to source your own M2 screws and standoffs, check out the M3 version here.

http://armattanproductions.com/pages/kit_detail/559

Screw holes for motors will support 1304s but motors will overhang the mounts on the outside by approxiately 1.5mm on sides.

The quad pictured is my build with the TF-135M2 Frame with:

Customer Alienflight F3 flight controller

Littlebee 20a BLHELI_S 20A Escs

RotorX1105B 6500KV motors

HQProp 3x3

Eachine MC01 AIO Camera/VTX