Dr M
Kits
-
-
Defiance PRO 224 Frame Kit-OPEN SOURCE
$ 63.96From the creator of the Atas Defiance 265
Daxo, presents the 2nd generation of the Defiance airframe built for FPV!
Now, Open-Source! Visit the store and you can download cut files from each part page.
If you are looking for something unique, elegant and well crafted, the Defiance PRO ticks all the boxes.
The 224 PRO can be best described as a remarkable evolution of the original design, highlighted with a complete rework of the upper section and additional undercarriage strengthening with a significant reduction in dry weight across the board.Once built, near center mass of the model makes for smooth and precise maneuvering, while it's compact and functional chassis design physically encapsulates and protects all of your electronics.
Important!
- Battery fitting height capacity is max 36.5mm, recommended length in between 72-78mm.
- Integrated camera mount is intended for HS1177 Camera
Features:
- - Innovative, compact and streamlined design composed of high-quality materials
- - Quality 3K Twill matte Carbon Fiber with stellar cut finish
- - 224mm Motor-to-Motor, supporting 5" propellers.
- - Protection of all vital electrical components including battery
- - Great flight characteristics
- - Lightweight and rigid(148grams w/ Steel screws or 127grams w/ Alu screws)
- - Capable of 3-4S powertrains
-
D265 - Cine Mount
$ 19.96Defiance 265 - Cine Mount
Mobius Camera Lens+Cmos module protective case kit
Required to complete the assembly: 2 x M3 x 15mm Female/Female Spacers
Products
-
-
-
-
-
Defiance 265 - RollCage_CARBONFIBER_1MM_MATE_1x Piece
$ 4.62Note!
2x Pieces required to complete the kit assembly!!
-
Defiance 265 - BridgeSidePlate_CARBONFIBER_1.5MM_MATE_1x Piece
$ 13.04Note!!
2x Pieces required to complete the kit assembly!!
-
Defiance 265 - ChassisSupportUSB_CARBBONFIBER_1MM_MATE_1 PIECE
$ 2.40Intended to be used with Defiance PDB, where Flight Controller is installed in the lower main plates, the power train section.
Note!! Only 1 piece required!
-
Defiance 265 - ChassisSupport_CARBBONFIBER_1MM_MATE_1 Piece
$ 2.402x pieces required per Defiance Frame Kit
-
-
Defiance265 - 5mm_CARBON_FIBER - Front Riser/Bumper block
$ 4.68Defiance 265 - upgraded parts by the frame designer!
By a request of the Defiance flyers I've designed some extra upgraded parts for their builds that usually wouldn't be produced duo to low volumen demand.
Defiance 265 - Designer Beta front 5mm CFK Riser/Bumper block piece...
By installement of this piece you will be able to use the 35mm spacers to get more battery fitting capacity and reinforce the bottom front bumper on your Defiance, while maintaining full functionallity as it provides the same mounting holes/slots as the undercarriage bottom plate does...
Important note!!
You will need to acquire 2 x M3x12mm screws separately to assemble this between the bottom plate and the Alu I-Holder part!!
This part is not compatible with early beta and preorder batch kits! There's 1mm offset towards front in camera mount slots position, if you do not use the camera mount plate this is of no relevance!
e.g. if you use a cased camera with it's mount bracelet you wont be using the camere mount plate so the slots offset has no impact on the assembly.
Please contact me if you would like to get a 5mm Riser/Bumper block piece with the older slot offset.
