1. Home
  2. Shop
  3. Bando Racers
  4. karl derner

karl derner

Image

Contact Designer

.....
Image

Bando Racers

Visit Store

Kits

  • Kit
    More Details

    40R2
    $ 29.41
    The new 40R. This time with changeable bommerang arms. The arms are 5mm thick. The base 3mm and the top 2mm thick. Stack mounting is m2 20x20 and motor mounting is m2 10mm 14-16xx motors. Prints for cam and pod are available here. https://www.thingiverse.com/groups/bando-racers/things Unfortunately the screws need to fit the canopy or braces are not available on armattan productions. If you wish to fit the printed canopy, you will need 18mm m3 screws for the front. For the braces you will need 10mm m2 screws. The arms are fitted on top of the base plate. Nut and standoff on last.
  • Kit
    More Details

    Bandito 2.5
    $ 14.06
    The Bandito 2.5 isn't a newer version of the Lil Bandito, but it's bigger brother. You can still do the power whoop conversion, only you will need to extend the wires. Your not however limited to brushless whoop parts you can also fit 16x16 fc stack and standard 11xx motors. With the Bandito 2.5 you can now fit 65mm props and the option to top mount your lipos too. Files for the printed parts such as the camera mount and xt30 mount are availble from here... https://www.thingiverse.com/groups/bando-racers/things Or will be in the next day or two. 2mm thick bottom 1.5mm thick top 14mm camera Whoop fc / 16x16 fc 080x motors Betafpv 1103 Standard 11xx motors Buikd weight with power whoop parts aroubd 35-40g
  • Kit
    More Details

    30R
    $ 29.99
    Tough with 4mm base. 1.5mm top plate. This frame weights around 26g with hardware. 30g with printed canopy 20x20 fc mount and build height of 25mm. It has 9-12mm motor mount pattern, so 11xx to 14xx Motors. A dry weight can be about 150g with 1507 motors and dal cyclone 3056 props. AUW of about 230g can be attained with 650mah 4s. All 3D prints such as cam mount, antenna mounts and canopies can be found here... https://www.thingiverse.com/groups/bando-racers/things
  • Kit
    More Details

    Twiglet. 65mm Whoop conversion
    $ 14.99
    This frame can turn your brushless whoop into a 2.5 Or ever 3" little ripper. This frame is cut with the weave running along the arms to make it stronger and stiffer. This does come at a price. Literally, hence the price. You can fit 16x16, 20x20 and Whoop style stacks. 080x motors, betafpv 1103 and usual 9mm m2 mounted motors. So upto 1206 motors( though maybe not recommended dude to the motor weight). The frame is 2mm thick. And weighs about 6.5-7g. X4 m2 12mm screws are in the kit but you could always use nylon m2 standoff spacers.
  • Kit
    More Details

    Bando Basher 4
    $ 39.99
    Here's my latest 4" frame. The Bando Basher 4. A low profile top deck mount. Designed to house the Caddx Turtle or Runcam split mini. (Any 19mm camera) with dual 20x20 stack or 30.5x30.5 fullsizewith an 20mm build height. 12mm m2 motor mount The frame weight with hardware is about 57g. 2mm thick top, cam pod and 4mm thick Unibody
  • Kit
    More Details

    Bando Racers 40R
    $ 34.50
    Light weight and tough with 4mm base. 1.5mm top plate. This frame weights around 40g with hardware. 20x20 fc mount and build height of 25mm. It has 9-12mm motor mount pattern, do 11xx to 14xx Motors. A dry weight can be under 160g with 1606 motors and Hq 4x4.3x3 props A 3d print stl file for camera mount can be found here... https://www.thingiverse.com/thing:3166003
  • Kit
    More Details

    Lil Bandito base only
    $ 8.95
    This base is about 5.9g. The 3d printed adaptor from here is required. https://www.thingiverse.com/thing:3166012 You can either use a brushless whoop fc OR a 16x16 stack. I used the hakrc 10A esc and super_s f4 fc. And racerstar br1103b 10k kv motors. Hulkie 2040 props. Lil Bandito base plate can be used for betafpv 75x or Mobula7 transplant using the 3d print. It has 2 position for 16x16 flight controllers, also a 20x20 fight controller can be fitted. 9mm m2 (11xx) motors can be fitted. 8.5mm m1.5 (75x) motors Can't be fitted. 6.6mm m1.4 (mobula7) motors can be fitted. UPDATED BASE. PRINT IS NO LONGER NEEDED FOR WHOOP FC
  • Kit
    More Details

    Bando Basher 3 inch HD
    $ 33.75
    The Bando Basher. Duelly named for being durable, and with the optional fit braces, even more so. As well as being agile and accurate in flight with its really low battery mount height. Which sits below the pro line giving it great balance and close centre of gravity. This frame has a dual 20x20 stack mounts so there plenty of room to fit your favourite HD micro cam. There is also to option to fit a full size 30x30 fc. Total built height space is 18mm. The motor mount pattern is 12mm so you can fit from 13xx to 16xx motors. Please check the motors. The top plate has sma hole. Click this link https://www.thingiverse.com/thing:3166005 for a 3d printed antenna/xt30 mount stl. The weight of this frame with hardware is about 54g. A weight saving of about 7g if you don't use the braces.
  • Kit
    More Details

    Bando Racer 25R
    $ 24.99
    Light weight and tough with 4mm base. 1.5mm top plate. This frame weights around 20g without hardware. 20x20 fc mount and build height of 20mm. It has 9-12mm motor mount pattern, do 11xx to 14xx Motors A 3d print stl file for camera mount can be found here... https://www.thingiverse.com/thing:3166003
  • Kit
    More Details

    BR3 - Micro (4 inch) HD
    $ 39.99
    With these new sides it's possible to fit the Runcam split mini. But you do however have to fit the esc as low as possible. While designed around 3" propellers, this frame also can fit 4" props "just." So you can use the 3" props for fun and tight winding tracks our you can use the 4" props for big open freestyle areas or fast longer race tracks. This frame is Do versatile you can take it anywhere. 165mm motor to motor Very slightly wider than true X Weight is 32g before hardware. 20x20 component mounting. 13xx-15xx. Motor mounting. Swift/arrow/other- micro ccd camera. If you already have a BR2. You could simply swap out this bottom plate and motors and you can up size from 2" to 3 and 4" Now with the base plate with arms cut along the weave for extra strength (and unfortunately extra price)
  • Kit
    More Details

    BR2.5 HD
    $ 28.50
    This is the same frame base as the br25 on with these different Side panels you can fit a Runcam split mini to record hd with minimal to no props in view. For an easy build, use the hglrc Zeus fc. But if you want more power and run 4s it can be done unwinding a double stack fc like pictured, but you will need to plan this carefully and fit the esc low as possible. 2.8" props will also fit this frame, with minor chamfer filing too the rear of carbon sides. This is the BR2.5 frame. Every piece of carbon is 3mm thick for a bit of robust assurance. Small and agile to fly anywhere yet it has the characteristics of a bigger quad. 20x20mm m2 fc mount Runcam swift micro Upto 2.5" props 11xx sized motors. Cable tie antenna mounts on the sides too keep them secure. 120mm motor to motor Around 20g of carbon without hardware.
  • Kit
    More Details

    BR5
    $ 39.99
  • Kit
    More Details

    BR25 2 and half inch frame kit
    $ 27.99
    This is the BR2.5 frame. Every piece of carbon is 3mm thick for a bit of robust assurance. Small and agile to fly anywhere yet it has the characteristics of a bigger quad. 20x20mm m2 fc mount Runcam swift micro Upto 2.5" props 11xx sized motors. Cable tie antenna mounts on the sides too keep them secure. 120mm motor to motor Around 20g of carbon without hardware.
  • Kit
    More Details

    BR3 - Micro (4 inch)
    $ 39.99
    While designed around 3" propellers, this frame also can fit 4" props "just." So you can use the 3" props for fun and tight winding tracks our you can use the 4" props for big open freestyle areas or fast longer race tracks. This frame is Do versatile you can take it anywhere. 165mm motor to motor Very slightly wider than true X Weight is 32g before hardware. 20x20 component mounting. 13xx-15xx. Motor mounting. Swift/arrow/other- micro ccd camera. If you already have a BR2. You could simply swap out this bottom plate and motors and you can up size from 2" to 3 and 4" Now with the base plate with arms cut along the weave for extra strength (and unfortunately extra price)
  • Kit
    More Details

    BR3HD 3 inch micro frame 3mm
    $ 33.00

    This is a 3 inch micro frame perfect for Bando flying. Its a robust (everything 3mm thick) frame that has both 20x20 mounting for keeping the weight low for racing or 30.5x30.5 fc mounting to allow you find it a runcam split for that HD freestyle flight.

    This is a bottom mounted stretch X frame.

    Camera mounted via the metal bracket supplied with the runcam mini. Hs1177 does not fit.

    20x20 and 30.5x30.5 fc mounting options.

    12mmx12mm m2 motor mounting. 13xx to 18xx motors

    Plate at the rear to fit vtx pigtail. 3 inch props

  • Kit
    More Details

    BR2 2 inch micro frame 3mm base and sides updated parts
    $ 25.99

    The BR2 is a 110mm stretch X micro racer. Perfect for those tight Bando gaps. it can go anywhere  whoop can but with close flight characteristics and thrust as a 5 inch!

    It has 3mm thick base plate and side panels making it pretty damn strong. Carbon weight is about 20g

    It can hold a arrow/swift micro cam.

    20x20 fc/esc mounting

    11xx motor mounting with 2 inch props. (Gemfan 2035 are best)

     

    There is enough room for a triple stack such as the HGLRC XJB F425 and their vtx on top.

    Now looking fresher and stronger with refined new parts

Products