MarioQuad FPV
Products
-
Rotaro Rocket Bottom Plate 3mm v4
$ 4.05This is an updated version of the Rotaro Rocket Bottom Plate.
Removed the tabs that whas supposed to lock the batterystap, since these cuts the strap.
Removed slots for batterystrap along the longside of the quad, never used these, and it weakens the overall strenght.
Added a bit more material in the back, and added slots for stripsing down the batterywires.
-
Rotaro Rocket Top Plate 3mm for Wide Back
$ 3.69This is a new top plate for the Rotaro Rocket frame made by ROTARO - JFK.
Its made with 3mm instead of 2mm Carbon. And is wider in the back so you can use the outher standoffs.
Made with a venting slot in the midle to let more air in to cool down the HD Zero Race V2 VTX that is mounted on top of the ESC/FC stack.
I've also made a new turtlestick that mounts perfectly on top, letting air throug it. See thingiverse: https://www.thingiverse.com/thing:5265697
-
Rotaro Rocket Top Plate 3mm Wide Back Pressfit v3
$ 3.69This is a new top plate for the Rotaro Rocket frame made by ROTARO - JFK.
Its made with 3mm instead of 2mm Carbon. And is wider in the back so you can use the outher standoffs.
This version has space for pressfit nuts on the underside, to easily mount the turtlestick/fin on top without the need of a loose nuts underneath.
I've also added whoop holes so you can mount eihter HD Zero Race VTX or the HD Zero Whoop VTX underneath the top plate.
Made with a venting slot in the midle to let more air in to cool down the VTX.
I've also made a new turtlestick that mounts perfectly on top, letting air throug it. See thingiverse: https://www.thingiverse.com/thing:5265697