The Micro Ghoul 100 is the 2" version of the Ghoul 220 5" Freestyle frame.

NOTE: Hardware currently not included, you will need:

• 4x M2x20mm screws
• 4x M2 Nuts
• JST Connector
• Some 16awg silicon wire to use as vibration dampening standoffs (works great, just cut to lenght and remove the internal wire)
• Small LiPo strap or rubber bands
• Blue Threadlocker (yeah, use it on the M2 nuts and for the M2 motor scews)
• Biadhesive (just a little under the cam and to mount the receiver)

This is a very specific build to get the most out of this size and design with a tested and reliable setup, scroll down for a list of reccomended parts!

It's made for a 16x16 Flight Controller and 4in1 ESCs, RTF is ~65g with the reccomended build, LiPo included!

IMPORTANT: As Gemfan Hulkies are not currently available for the public to buy with the "squared hole" for their 0806, I reccomend to get the "Alternative" Motors and Props linked below.

Reccomended build:

Flight Controller: Furious FPV Racewhoop – The best 16x16 FC around, from the Furious FPV team!

ESCs: Furious FPV Fishpepper 5A 4in1 – 4in1 16x16 ESCs for a nice and clean build, perfect for 2" at 2S.

Motors: Gemfan M0806 6200kv – Great little motors, they really work great with this setup.

Alternative Motors: Born To Be The Best 0806 6200kv - They are almost like the Gemfan ones, but with a standard prop mount.

Props: Gemfan Hulkie 2040-3 "Squared hole" for M0806 – [COMING SOON]

Alternative Props: Gemfan Hulkie 2040-3 "Standard" - The standard version for the BBB motors.

FPV Camera + VTX: FXT FX798T – Decased and with dipole “stinger” antenna. To fit a CP you will need to remove it and soldering it back after assembly.

Receiver: FrSky XM – Great micro receiver from FrSky, but you can also use a R-XSR for diversity etc, or any micro receiver to suit your transmitter.

LiPo: Turnigy nano-tech 300mAh 2S 45-90C – Nice cheap LiPos with the perfect power to weight ratio for this setup.