FPV Board Camera mount plate for the XMR frame with 35mm standoffs.
This mount plate ONLY works with board cameras with 24mm hole spacing and 28mm board size such as the RunCam PZ0420M. This will not work with the traditional 30mm board cameras. Also it ONLY works on the XMR frame with the 35mm standoffs. It will not work with the 25 or 30 mm standoffs. You will need to use a smaller camera with it's own mounting hardware for those size standoffs.
WARNING! This plate will not quite fit the whole housing of the lense through the hole in the center! A v2 plate is available that will solve this problem if you want to use the standoffs. This plate still works fine, you will just need to file the edges of the hole a bit to allow the lense housing to pass through freely! Also if you file down the corners of the lense housing a tiny bit, the camera will actually pressure fit with no standoffs, and hold in firmly enough to not fall out at all. This can save you the weight fo the standoffs, and allows this moutn to work with full size PZ0420 style board cameras.
Review Section ( Total Review:0 )
No Review Found