Wingspan: 1060mm, arms can be adjusted +-60mm without swapping the arms. Default configuration uses 500mm arms.

Designed around the following components:

Motors:

• KDE 5215
• T-Motor MN605S
• MAD Polars
• RCINPower GTS 4715
• any with a similar bolt pattern

Props:

12" to 28" props depending on your powerplant setup.

Battery:
    12S (2x6S) 8-10Ah (or larger depending on upper standoffs used)

    25mm upper standoffs allows for 2x6S Tattu R-Line 95C 5100mAh to be used.

Electronics:

• APD 120F3 ESC and 500A PDB
• BrainFPV Radix FC
• Plenty of real estate to toss whatever else you'd want on it.

Gimbal:

• Gremsy S1/T3 gimbal bolt pattern on lower plate

The lower plate allows for two different widths of mounting 12mm dampening rings to hold round camera rails if you're not bolting a gimbal directly to the frame.

You will also need the following to complete the assembly.

3D Printed parts:

https://www.thingiverse.com/thing:4143938

Nuts, Bolts, Standoffs, Clamps and Tubes.