Kristjan Minn
Kits
-
PITs Torque (5front 6back) Hybrid
$ 43.98This is a kit of all carbon parts for the PIT's Torque 5 inch hybrid racing frame.
More pictures and a short story about this frame here:
https://rotorbuilds.com/build/17646To build a complete frame with electronic stack mounting included, You will need an additional:
TPU parts (print yourself or ask a friend):
FPV camera mount and wire claps. Models available for free here:
http://thingiverse.com/KrisMin/collections/pits-torque
Aluminium:
20-22mm m3 standoffs - 4pcsSteel or Titanium alloy:
For mounting the top plates:
8mm m3 button head bolt - 4pcsFor mounting the arms:
12-14mm m3 flat (sunk) head bolt- 4pcs
18-20mm m3 flat (sunk) head bolt - 4pcs
m3 sunk nuts - 8pcsFor the electronics stack:
10mm m3 flat (sunk) head bolt - 4pcs
22mm m3 button head bolt - 4pcs
m3 nuts - 12pcs (may use nylon instead of metal)Additional:
rubber or nylon washers/spacers for electronics stack.
4 pcs m3 (3/6mm) rubber vibration dampers.
m3 9-10mm button head bolts for mounting the motors - 16pcs. -
PITs Torque 5 inch
$ 42.86This is a kit of all carbon parts for the PIT's Torque 5 inch racing frame.
More pictures and a short story about this frame here:
https://rotorbuilds.com/build/17646To build a complete frame with electronic stack mounting included, You will need an additional:
TPU parts (print yourself or ask a friend):
FPV camera mount and wire claps. Models available for free here:
http://thingiverse.com/KrisMin/collections/pits-torque
Aluminium:
20-22mm m3 standoffs - 4pcsSteel or Titanium alloy:
For mounting the top plates:
8mm m3 button head bolt - 4pcsFor mounting the arms:
12-14mm m3 flat (sunk) head bolt- 4pcs
18-20mm m3 flat (sunk) head bolt - 4pcs
m3 sunk nuts - 8pcsFor the electronics stack:
10mm m3 flat (sunk) head bolt - 4pcs
22mm m3 button head bolt - 4pcs
m3 nuts - 12pcs (may use nylon instead of metal)Additional:
rubber or nylon washers/spacers for electronics stack.
4 pcs m3 (3/6mm) rubber vibration dampers.
m3 9-10mm button head bolts for mounting the motors - 16pcs.
Products
-
PITs Might 4-bolt version
$ 17.49PIT's Might is a 2.5" style unibody featherweight park flyer. Its a slightly stetched X.
Most all in one style boards are suitable. the bolt pattern for fc/esc is 25.5mm.
Flat base for mounting the battery - . If you build this quad with a PIT's Might harnesses, then use M2 12mm flat head (sunk head style) bolts the electronic stack.
Only 4-bolt motors are suitable. A'ka AmaxInno 1103 4-bolt or Brotherhobby R3 1103 4-bolt versions.
Weight <7 g.
A hint: Buy two frames with a single order and your order shipping fee stays at 5$ (orders under 35$).
Enjoy!
-
-
Pits Torque Shifter
$ 2.49This Pits Torque Shifter is smaller than the previous version and therefor there's space in front of a quad for an rx.
-
Pits Torque 6 Inch Right Arm
$ 5.49Pits Torque 6 Inch Right Arm.
Torque arms use sunk nuts instead of regular nuts. Sunk nuts are more convinient to use and provide some extra resistance against arm wiggle. -
Pits Torque 5 Inch Right Arm.
$ 4.99Pits Torque 5 Inch Right Arm.
Torque arms use sunk nuts instead of regular nuts. Sunk nuts are more convinient to use and provide some extra resistance against arm wiggle. -
Pits Torque 6 Inch Left Arm
$ 5.49Pits Torque 6 Inch Left Arm.
Torque arms use sunk nuts instead of regular nuts. Sunk nuts are more convinient to use and provide some extra resistance against arm wiggle. -
Pits Torque 5 Inch Left Arm
$ 4.99Pits Torque 5 Inch Left Arm.
Torque arms use sunk nuts instead of regular nuts. Sunk nuts are more convinient to use and provide some extra resistance against arm wiggle. -
-
PITs Torque top (4mm cf). Chamfered and cut along weave.
$ 2.95PITs Torque top (4mm cf). Chamfered and cut along weave.