Nicholas Hayler
Kits
-
Princess Bubblegum (with 0-50 degree bracket) with 6 inch arms
$ 43.00Before purchasing this kit please carefully read the following write up: https://docs.google.com/document/d/1Uko4-TYVWDNgzHwWKTdRKM1Mc5BKiKruOexLL2mzaT8/edit
-
Princess Bubblegum (with 0-50 degree bracket)
$ 39.00Before purchasing this kit please carefully read the following write up: https://docs.google.com/document/d/1Uko4-TYVWDNgzHwWKTdRKM1Mc5BKiKruOexLL2mzaT8/edit
-
Princess Bubblegum
$ 35.00Before purchasing this kit please carefully read the following write up: https://docs.google.com/document/d/1Uko4-TYVWDNgzHwWKTdRKM1Mc5BKiKruOexLL2mzaT8/edit
-
Princess Bubblegum Basic Hardware Kit
$ 3.60This kit contains the basic hardware needed to put together the "Princess Bubblegum" frame kit. Motor screws not included. There are many possible ways to assemble the Princess Bubblegum, all of which require a specific set of hardware. Please carefully consider the way in which you will be assembling the frame before you determine which hardware is right for you. More information at www.facebook.com/princessbubblegumframe
Products
-
-
LSP 205 top plate (minimalist style) 2mm
$ 3.00Please fully read this google doc before purchasing: https://drive.google.com/open?id=1OFnT7zNFgDI3MGC6CYawW2mY3eY166kxoDVutBrISbU
-
LSP 205 top plate 2mm
$ 3.00Please fully read this google doc before purchasing: https://drive.google.com/open?id=1OFnT7zNFgDI3MGC6CYawW2mY3eY166kxoDVutBrISbU
-
LSP 205 special camera bracket (1 piece) 1.5mm
$ 1.50Please fully read this google doc before purchasing: https://drive.google.com/open?id=1OFnT7zNFgDI3MGC6CYawW2mY3eY166kxoDVutBrISbU
-
LSP 205 MAIN PLATE (WITH CAMERA BRACKET SLITS) 4MM
$ 39.00Please fully read this google doc before purchasing: https://drive.google.com/open?id=1OFnT7zNFgDI3MGC6CYawW2mY3eY166kxoDVutBrISbU
-
LSP 205 top plate (with camera bracket slits) 2mm
$ 3.00Please fully read this google doc before purchasing: https://drive.google.com/open?id=1OFnT7zNFgDI3MGC6CYawW2mY3eY166kxoDVutBrISbU
-
Princess Bubblegum special HS1177 bracket with 5 degree increments 0-50 degrees (2mm)
$ 2.25you will need a custom 3d printed piece for the back of your HS1177 in order to use this bracket properly
-
Princess Bubblegum lipo strap bar (2mm)
$ 1.50This item is a single piece (You will need 2 in order to use them properly)
