Nerdboy Little Shop
Products
-
F1-6 / F1-5 LOWPROFILE - MAIN TOP PLATE 20MM
$ 11.72-One top plate, 2mm thick, for low profile F1-5 or F1-6 to use with 20mm standoffs.
What you will need to build the low profile F1-5/6:
- The original F1-5/6 arms and center plates.
- The low profile top plate for 20mm standoffs.
- 2 x low profile camera braces for 20mm standoffs.
- The low profile camera top plate (optional, but rigidify the camera braces and hold the bobbins for the mobius camera plate if needed).
- 2 x Rubber Dimes and the associated hardware to hold the camera.
- 8 x 20mm standoffs.
- 1 x 28mm standoff to link the two braces above the camera.
- You can use the original mobius camera plate with the 3 bobbins if you want.
- Please be aware the original led pad doesn't fit anymore so the wholes to fix it on the top plate have been removed.
Happy flying!
-
F1-6 / F1-5 LOWPROFILE - CAMERA TOP PLATE 20MM
$ 1.32-One camera top plate, 1.5mm, for low profile F1-5 or F1-6 to use with 20mm standoffs.
What you will need to build the low profile F1-5/6:
- The original F1-5/6 arms and center plates.
- The low profile top plate for 20mm standoffs.
- 2 x low profile camera braces for 20mm standoffs.
- The low profile camera top plate (optional, but rigidify the camera braces and hold the bobbins for the mobius camera plate if needed).
- 2 x Rubber Dimes and the associated hardware to hold the camera.
- 8 x 20mm standoffs.
- 1 x 28mm standoff to link the two braces above the camera.
- You can use the original mobius camera plate with the 3 bobbins if you want.
- Please be aware the original led pad doesn't fit anymore so the wholes to fix it on the top plate have been removed.
Happy flying!
-
F1-6 / F1-5 LOWPROFILE - CAMERA BRACE 20MM
$ 2.50-One camera brace, 1.5mm, for low profile F1-5 or F1-6 to use with 20mm standoffs.
What you will need to build the low profile F1-5/6:
- The original F1-5/6 arms and center plates.
- The low profile top plate for 20mm standoffs.
- 2 x low profile camera braces for 20mm standoffs.
- The low profile camera top plate (optional, but rigidify the camera braces and hold the bobbins for the mobius camera plate if needed).
- 2 x Rubber Dimes and the associated hardware to hold the camera.
- 8 x 20mm standoffs.
- 1 x 28mm standoff to link the two braces above the camera.
- You can use the original mobius camera plate with the 3 bobbins if you want.
- Please be aware the original led pad doesn't fit anymore so the wholes to fix it on the top plate have been removed.
Happy flying!