Powerloop Racing - Spike - 230mm - chamfered arms, specifications

• True X Freestyle frame
• Propellers up to 5.1 
• 4mm arms
• Battery: top mount (transversal mount is also possible, and even bottom mount if you chamfer the edge on the bottom plate), fit with most of the 1300 -1500 mAh LiPo.
• Cam plate compatible with Runcam Swift 2 and Foxeer Predator Mini
• Press nuts for easy arm replacement
• Vertical plate to fix the VTX and the RX
• The rear lipo strap goes through the vertical plate, allowing a narrow rear end : better look, less weight, and more fresh air for the rear motor 

TPU accessories : HD cam mount, VTX antenna mount, RX antenna mount , crossfire immortal T antenna mount, ...(stl files) are available here:

https://www.thingiverse.com/MLecchi/designs

Informations about the hardware included in the kit:

• M3x6mm screws: use it for the 6 standoffs on bottom plate and the 2 rear standoffs on the top plate
• M3x8mm screws: use it for the 4 front standoffs on the top plate. The extra length is here in case you want to mount a HD cam mount in TPU
• M3x10mm screws: use it for the outer press nuts
• M3x12mm screws; use it for the inner press nuts
• No Nylon hardware included. If needed, you can add parts to your cart from the "Hardware " Category in the left menu .
• M3x12mm screws can be replaced by longer screws (hardware category in the left menu) depending on the type of nylon hardware you want to use for the FC and ESC or PDB (12mm screws are recommended for M/F nylon standoffs, longer screws are recommended for F/F nylon standoffs)

Note: the pictures here below are the pictures of the version without chamfered arms

Please feel free to contact us on facebook or directly via Armattan productions!

https://www.facebook.com/PowerloopRacing/

Powerloop Racing - Spike - 230mm, specifications

• True X Freestyle frame
• Propellers up to 5.1 
• 4mm arms
• Battery: top mount (transversal mount is also possible, and even bottom mount if you chamfer the edge on the bottom plate), fit with most of the 1300 -1500 mAh LiPo.
• Cam plate compatible with Runcam Swift 2 and Foxeer Predator Mini
• Press nuts for easy arm replacement
• Vertical plate to fix the VTX and the RX
• The rear lipo strap goes through the vertical plate, allowing a narrow rear end : better look, less weight, and more fresh air for the rear motor 

TPU accessories : HD cam mount, VTX antenna mount, RX antenna mount , crossfire immortal T antenna mount, ...(stl files) are available here:

https://www.thingiverse.com/MLecchi/designs

Informations about the hardware included in the kit:

• M3x6mm screws: use it for the 6 standoffs on bottom plate and the 2 rear standoffs on the top plate
• M3x8mm screws: use it for the 4 front standoffs on the top plate. The extra length is here in case you want to mount a HD cam mount in TPU
• M3x10mm screws: use it for the outer press nuts
• M3x12mm screws; use it for the inner press nuts
• No Nylon hardware included. If needed, you can add parts to your cart from the "Hardware " Category in the left menu .
• M3x12mm screws can be replaced by longer screws (hardware category in the left menu) depending on the type of nylon hardware you want to use for the FC and ESC or PDB (12mm screws are recommended for M/F nylon standoffs, longer screws are recommended for F/F nylon standoffs)

Please feel free to contact us on facebook or directly via Armattan productions!

https://www.facebook.com/PowerloopRacing/

Powerloop Racing - Spike - 230mm, specifications

• True X Freestyle frame
• Propellers up to 5.1 
• 4mm arms
• Battery: top mount, fit with most of the 1300 -1500 mAh LiPo.
• Cam plate compatible with Runcam Swift 2 and Foxeer Predator Mini 
• Press nuts for easy arm replacement
• Vertical plate to fix the VTX and the RX
• The rear lipo strap goes through the vertical plate, allowing a narrow rear end : better look, less weight, and more fresh air for the rear motor 

TPU accessories : HD cam mount, VTX antenna mount, RX antenna mount , crossfire immortal T antenna mount, ...(stl files) are available here:

https://www.thingiverse.com/MLecchi/designs

Informations about the hardware included in the kit:

• M3x6mm screws: use it for the 6 standoffs on bottom plate and the 2 rear standoffs on the top plate
• M3x8mm screws: use it for the 4 front standoffs on the top plate. The extra length is here in case you want to mount a HD cam mount in TPU
• M3x10mm screws: use it for the outer press nuts
• M3x12mm screws; use it for the inner press nuts
• No Nylon hardware included. If needed, you can add parts to your cart from the "Hardware " Category in the left menu .
• M3x12mm screws can be replaced by longer screws (hardware category in the left menu) depending on the type of nylon hardware you want to use for the FC and ESC or PDB (12mm screws are recommended for M/F nylon standoffs, longer screws are recommended for F/F nylon standoffs)

Please feel free to contact us on facebook or directly via Armattan productions!

https://www.facebook.com/PowerloopRacing/

The Explorer is a 6" Wide X frame, dedicated to mid/long range FPV. 

Main specs:

-250mm motor to motor

-Design for Foxeer mini cameras (predator mini, arrow mini, ...)

-Motor mounting format: 16x19mm or 19x19mm

-Depending on the hardware (standoff and screws) the weight of the frame is between 100-110g

-FC Mounting pattern: 30.5x30.5mm 

-Enough space for the TBS UNIFY PRO32 HV (MMCX) 1000 mW + your favourite gear

Do not hesitate to contact us on Facebook: https://www.facebook.com/PowerloopRacing/

• 7in dedicated to HD
• Squish X geometry
• This "Long Body" version is compatible with DJI AIr unit or Caddx Vista
• 6mm arms

Please feel free to contact us on facebook or directly via Armattan productions!

https://www.facebook.com/PowerloopRacing/

More information here: https://powerloop-racing.jimdofree.com/miss-hill/

Miss Hill Carbon structure

A complete body kit (to be 3D printed) is available for download here: https://www.thingiverse.com/thing:4789823   

Specs

• 5in
• 5mm arms
• 16x19 or 19x19mm Motor mounts
• Maximum outer diameter for the motor (without modifying the 3D printed parts): 29.5mm
• Maximum dimensions for the battery: 78 x40 x 38mm (e.g. Tattu Rline 6S 1050 V3)

Hardware included:

Standoffs

• M3 x 45mm - 4 pcs - aluminium

Screws

• M3 x 6mm  - 6 pcs : 4 for the nose and  2 for the tail parts of the body kit
• M3 x 8mm - 8 pcs: for the aluminum standoffs
• M3 x 14mm  - 16 pcs: for the motors
• M3 x 14mm - 4 pcs: for the arms
• M3 x 16 mm - 16 pcs: for the motors (additional length compared to M3x14mm, if needed)
• M3 x 20mm - 4pcs: for the arms (and the ESC/FC)

Nuts:

• M3 nylstop - 8 pcs : for assembling the arms/Top plate/Bottom plate (Note 4 of them, the inner ones, can be replaced by standard nuts to reduce the FC/ESC stack height, but standard nuts are not available on the armattan productions website)
• M3 sunk nuts - 4 pcs: for fastening the nose of the bottom plate

Hardware not included and not available on this website:

• M3 standard nuts - 2 pcs : for connecting the tail part of the body kit to the rest of the body kit
• M3 standard nuts - 4 pcs : OPTION replacing the nylstop nuts for a lower stack

Hardware you may need (available on this web site, to purchase separtately if you want):

• thumb screws - M3x7mm - 2pcs: for replacing the M3x6 screws used to connect the tail par o fthe body. Allow you to remove the tail without tool, to insert the battery
• M3 x 6 mm Nylon spacers - 4 pcs: for the FC/ESC stack
• M3 standard nuts - 4 pcs: for a lower FC/ESC stack
• M3 washers - up to 16 pcs: OPTION 

https://powerloop-racing.jimdofree.com/

https://www.facebook.com/PowerloopRacing