Z100 UNIVERSAL 3MM FRAME

This is an excellent and fast, lightweight 100mm frame with narrow arms for minimal wind resistance and thrust blockage. It is versatile and is capable of realizing the best performance from many different drive train combinations. 

This frame will accept the TOP MOUNT SLED ARM 1.5MM or SLED FOR ZAPPY FPV 1.5MM for FPV use.

SPECIFICATIONS:
Weight: 5.4gm
Frame size: 100mm
Config: True X
ESC/FC hole spacing: 16x16mm and 20x20mm
Motors: 1103/1104/1105/1106/1402
Motor mount hole spacing: 9mm with 2 x 2mm holes
Motor mount center hole: 4.2mm
Max prop size: approx 69mm (2.71")
Arm width: 2.6mm
Frame thickness: 3mm, cut with the carbon fibre grain running parallel with the arm for max strength.

RECOMMENDED COMPONENTS:
Motors: 1102/1103/1104/1105/1106/BH1402
Recommended motor weight: <6.5gm

ESC: As light as possible, as a rough guide use 5A or higher rating for 1102 up to 1105 5000kv 2S, and a 10A or higher rating for 1105 6500kv+ and 1106. If in any doubt go even higher, up to 20A can be bought with little weight penalty and is a good option for any motor.

Battery: For light LOS builds we have found the Nano-tech 2S 300mAh 45-90C battery to be the best option for this frame. A battery capable of supplying more current e.g. GNB 450mAh or larger will be required for the higher-current motors.

Props: GF2540, KK2535, RX2535, cut down 3020's are popular choices. Experimentation is the way to find the best prop for your quad.

This frame is probably the lightest in it's class, this makes it very versatile for various applications - FPV, LOS acro, endurance, or any application where you want minimum weight for maximum performance.