OVERVIEW

The Nyuki 100 is a micro fpv drone capable of using up to 2.5" propellers. The Nyuki is a pure X frame copter that is small, sleek and light. It is capable of fitting places most quads can not and being brushless makes it much lower maintenance than typical brushed micros. 

FEATURES

• Brushless Power
• True 90 degree X frame 
• Can run any 11xx size motors with standard 9mm mounting pattern.
• Compact FPV backpack with cam angle between 15-20 degrees.
• Integrated antenna protector
• Super strong one piece main frame
• Super small fly anywhere size
• AUW (w/500mah 2s lipo): 94g

INSPIRATION FOR THE DESIGN

The Nyuki 100 evolved out of a desire to have an indoor brushless copter. I was tired of changing out brushed motors over and over again and wanted something that was less maintenance and more powerful. I also wanted to use a CP antenna to have rejection of reflected signals, but I didn't want to keep squishing the exposed antenna. The result was a frame that had integrated circularly polarized antenna protection. After trying many ideas through 3D modeling software I settled on a design that was compact and used the standard FPV backpack made popular by the Tiny Whoop. Check out the RCGroups thread for more information and discussion about the frame. (https://www.rcgroups.com/forums/showthread.php?2792965-Nyuki-100-Brushless-Micro-Drone)

RECOMMENDED PARTS (Indoor Setup)

• 1102-1104 motors
• 2535 propellers
• 10+a ESCs (Aikon 20a SEFM)
• Micro FPV CAM + VTX combo such as Quanum Elite QB58 or FX789T
• Flight Controller with 20mm mounting pattern (Piko BLX)
• 350-500mah 2S Lipo 

RECOMMENDED PARTS (Outdoor Setup)

• 1104-1106 motors
• 2535 propellers
• 20a ESCs (Aikon 20a SEFM)
• Micro FPV CAM + VTX combo such as Quanum Elite QB58 or FX789T
• Flight Controller with 20mm mounting pattern (Piko BLX)
• 350-500mah 3S Lipo 

OPTIONAL PARTS

Removable Propeller Guards: http://armattanproductions.com/pages/product_details/5263

Frame with Built In Propeller Guards: http://armattanproductions.com/pages/product_details/5262

Light Weight 1.5mm Frame: http://armattanproductions.com/pages/product_details/5264

3D Printed Propeller Guards: https://www.thingiverse.com/thing:2234159

4-in-1 ESC Expansion

Want to run a 4-in-1 ESC with your Nyuki? If so just purchase the parts below and you will be able to stack the ESC under your flight controller. 

4mm Spacers (x4): https://armattanproductions.com/pages/product_details/5126

M3 25mm Screw (x4): http://www.fastener-express.com/m3-x-5-x-25mm-socket-head-cap-screws-alloy-qty-20.aspx

IMPORTANT

Armattan Productions also does not carry the three 20mm M3 standoffs necessary for the HD camera mount in their hardware selection. You can buy them from Space Cowboys on Armattan or other RC shops. Links below:

Space Cowboy on Armattan: https://www.armattanproductions.com/test/pages/product_details/3436

ReadymadeRC: https://www.readymaderc.com/store/index.php?main_page=product_info&cPath=53_585_586&products_id=5483

MEDIA

* V1 side plate shown, kit now comes with V2 side plate

* V1 side plate shown, kit now comes with V2 side plate

VIDEOS