Patrick- Gallery
Piko87
Price :
$
13.14
Propeller size :
None
Item List
-
Piko87 Top Plate For DIY Printed Top
Quantity :1
-
Piko87 Main Plate v4
Quantity :1
-
Piko87 Top Plate For Diatone Cam Mount
Quantity :1
-
25mm M3 F/F Alumi Tapped Standoff Black Anodized 5.5mm O.D.
Quantity :4
-
Quantity :4
-
6mm M3 M/F Nylon Standoff (per piece)
Quantity :4
-
Description
87mm Quad. Req'd parts:
- PikoBLX Flight Controller (or anything else with a 20x20mm hole spacing)
- ESCs smaller than 23x14x5mm or so - I recomment the Racerstar RS6a 2-3s, but in theory anything as big as a Littlebee should fit.
- 1104/6500 are known good, I expect 1103/8000 would be fine as well on 2s for something a little less high strung.
- I'm using the InnovaOSD/VTX from Furious, but there are options for VTX - note that at this size you don't want a full flavor SMA connector on the frame anywhere. Nowhere to put it, anyway.
- The 12x12mm diatone cam and mount works nicely, but this is the most DIY part of this build. If you don't have a 3d printer, I recommend the Diatone variant of the top, it just bolts up, no muss, no fuss.
- The smallest radio receiver you can find.
Assembly is pretty straightforward, although tricky.
Review Section ( Total Review:0 )
No Review Found
