This kit is designed to fit 220X motors with 16/19mm bolt pattern for 4 inch prop.  I'm running mine with UBAD 30A/EMAX 2205 2600KV and DAL tripple.  Great combo. This is by far my favorite quad set up right now.  Competitive on outdoor agility track and nimble enough for indoor.  Great balance between power and control. 

The kit only comes with the top and bottom plates.  You will need to get spacers/screws from your stash to complete the build.  You can use standard 35mm stack height, 30mm for compressed fit HS1177 or 20mm using pico cam.  It's all personal preference - I use 30mm on mine with zip tie on HS1177 to top plate.

The top plate is 3mm and will take the punishment.  I have broken many other frame with 1.5mm or 2mm top plates in my days and each time it cost me more than just the top plate - usually vtx/cam/etc.

Here is a video of the my set up flying the track carrying runcam2 HD. 

https://www.instagram.com/p/BHXv2o5B7cn/?taken-by=snokefpv