Hatfield Flightcraft
I design stuff primarily for my own enjoyment I hope you will enjoy my designs as well. My designs have only minimal testing before being released in the store. I make no claims to the performance or durability of the frames sold in this store. However, I do my best to design something others might also enjoy building and flying. Any positive feedback will be greatly appreciated.
Please follow me on Facebook at www.facebook.com/Hatfield.Flight/ to see what I am currently working on.
MS150L Mini Quadcopter
Item List
-
MS Series Camera Plate 20
Quantity :2
-
MS150L Top Plate
Quantity :1
-
MS Series Camera Plate 15-3
Quantity :2
-
MS150L Bottom Plate
Quantity :1
Description
IMPORTANT: This is a proof of concept design still at this state. Fit of parts have been confirmed but no durability testing has been performed so no claims are being made. Please take this into account if you puchase this frame.
IMPORTANT: This is a carbon plate only kit. No hardware is included and needs to be provided by purchaser. 4-8 20mm standoffs are required for a 20mm plate gap build. A single 20mm and 4-8 15mm standoffs are required for a 15mm build. I recommend using 3mm x 8mm screws for attaching standoffs to the bottom plate and a minimum of 3mm x 6mm screws for the top plate and camera plates.
This Quadcopter kit is designed for 3 inch propellers and a Runcam Micro Swift or similar sized camera. It can be built with a 20mm or 15mm plate gap. There is space for a TBS Unify V2/V3 video transmitter with a dipole or an antenna with a CFL connector.
Review Section ( Total Review:1 )
Eduardo Esparra
Really nice frame! getting another one as back up. Love the low stack 15mm spacing option.
