Luis - Gallery
I am just a curious guy that like to fly costum stuff.
Right now I am focussing on the v9 of a frame started with a friend that is also on sale in armattanproductions (AKA crazykitten).
Ths v9 is called creepykittens, I've been flying the prototypes for some time now and they are really good! Have a look and feel free to contact me anytime!
Creepykittens Complete Frame
Item List
-
CreepyKittens x_bottom_2mm (armattan nuts)
Quantity :1
-
Creepykittens arms_4mm
Quantity :5
-
Creepykittens bottom plate_2mm
Quantity :1
-
Creepykittens top plate_2mm
Quantity :1
-
M3 Stainless Steel Sunk Nuts (per piece)
Quantity :4
-
25mm M3 F/F Alumi Tapped Standoff Black Anodized 5.5mm O.D.
Quantity :4
-
10mm M3 Steel Button Head Bolt Black Anodized
Quantity :8
-
6mm M3 Steel Button Head Bolt Black Anodized
Quantity :8
Description
Welcome to the lair of the beast!
Here you can find a kit with all metal hardware needed to assemble the carbon pieces together!
We recommend using standoffs for the FC with some metal on the inside to better fix the arms.
This kit goes with 25mm stand-offs which is low but you can go crazy and get this beast rolling even lower!!!
We are currently using 20mm stand-offs BBBUUUUTTTTT the downside is that the center frame will be lower than the top of the motors. So if you are planning on using Mode or just waiting to be lucky and stand facing up after crashing, we recommend using a TPU Shark FIN
So FREAKING special!
You can use higher stand-offs, lower stand-offs, AIO controllers (XT60 always facing backwards), AIO ESC, arm mounted ESC, "standard" controllers, 3 types of fpv cameras standard fpv cams, mini or micro fpv cams. Use your stuff, don't need to buy new if you don't want to 
Additional Information
TPU EVERYWHERE
In today's World 3d printers are more and more accessible to all of us, either having one or knowing someone that can print stuff, so FPV cam is tpu mounted. (If you don't know or have access contact me... I can provide the service for these specific items)
There is also the FPV cam protection pussy stuff I know, but it saves lives! Imagine the souls I've spared of the poor deceased lens! (NOT NEEDED for the micro cameras)
There will also be a TPU mount for rx antennas. I am currently using them at the back of the back arms, though.
All the mounts (as pretty as the frame itself) are available on my thingiverse page:
Rx antenna holder (Link soon)
My current setup for 20mm:
cam: Foxeer micro arrow
vtx: VTX03
fc: Betaflight F3
esc: Spedix is30A
motors: Brother hobby R4
rx: XM+
WEIGHT:
Review Section ( Total Review:0 )
No Review Found
