Phoenix Multirotors
Welcome to Phoenix Multirotors! Based near Atlanta, Georgia, PM designs quadcopter frames for racing and freestyle with performance and ease of use in mind. Frames will range from 3" to 5" with new designs being worked on regularly to give you the most up-to-date, refined product.
ATTENTION
All products on this store are made to order and are not kept in stock by Armattan Productions! Expect 7-14 business days for production before shipment. Any questions involving orders need to be taken to support@armattanproductions.com.
Shift 3in
Item List
-
Shift 3in Arm
Quantity :4
-
Shift 3in Upper Plate
Quantity :1
-
Shift 3in Camera Plate
Quantity :2
-
Shift 3in Main Plate (Revised)
Quantity :1
-
M3 Nylon Nuts (per piece)
Quantity :8
-
8mm M3 Steel Button Head Bolt Black Anodized
Quantity :6
-
M3 Nylon Insert Nut Black Anodized (Nylock)
Quantity :8
-
20mm M3 F/F Alumi Tapped Stepped Standoff Black Anodized 5.5mm O.D.
Quantity :3
-
20mm M3 Steel Button Head Bolt Black Anodized
Quantity :4
-
10mm M3 Steel Button Head Bolt Black Anodized
Quantity :4
Description
Note: This kit was designed for the Runcam Micro Swift.
Make the Shift
Introducing Phoenix Multirotors' first micro offering: the Shift! This is a true-X frame designed to spin 3 inch props using the Runcam Micro Swift and 20 x 20mm flight controllers. The idea of the Shift is to take the tried-and-true "pod" layout and bring it to the micro scene. The camera pod is set to 40 degrees of tilt for fast forward flight with full camera protection.
The Shift uses a true-X format to keep things tight while retaining a consistent feel across pitch, roll, and yaw.
With micro components such as cameras and flight boards improving and becoming more common, the overall size of the frame was able to be shrunk down to a more compact size saving weight.
Rather than using standard M3 holes to mount the arms, the Shift incorperates a dual slot design allowing a reduction in both weight and drag while retaining strength. In the rare occurence of an arm breaking, only a single bolt needs to be removed to replace an arm to keep you off the bench and the in the air.
Additional Information
Note: The standoffs may need to be sanded down to 19mm to perfectly fit the camera but is not always necessary.
Specs
Weight: 34g
MTM: 125mm
Layout: True-X
Battery: Bottom Mounted
Recommended Parts
Camera: Runcam Micro Swift
FC: 20 x 20mm mounted board
Motors: 13xx or 14xx size
Battery: 650-850mAh 3-4S
ESC: 10-20 Amp mini ESCs
VTX: 25mW micro VTX
Review Section ( Total Review:0 )
No Review Found
