Phoenix Multirotors
Welcome to Phoenix Multirotors! Based near Atlanta, Georgia, PM designs quadcopter frames for racing and freestyle with performance and ease of use in mind. Frames will range from 3" to 5" with new designs being worked on regularly to give you the most up-to-date, refined product.
ATTENTION
All products on this store are made to order and are not kept in stock by Armattan Productions! Expect 7-14 business days for production before shipment. Any questions involving orders need to be taken to support@armattanproductions.com.
Adapt 5in
Item List
-
Adapt 5in Arm
Quantity :4
-
Adapt 5in Lower Deck
Quantity :1
-
Adapt 5in Upper Deck
Quantity :1
-
M3 Nylon Insert Nut Black Anodized (Nylock)
Quantity :4
-
10mm M3 Steel Button Head Bolt Black Anodized
Quantity :8
-
8mm M3 Steel Button Head Bolt Black Anodized
Quantity :8
-
30mm M3 F/F Alumi Tapped Stepped Standoff Black Anodized 6.3mm O.D.
Quantity :4
-
6mm M3 M/F Nylon Standoff (per piece)
Quantity :4
-
M3 Nylon Nuts (per piece)
Quantity :4
Description
Note: This frame was designed around the Runcam Mini Swift.
Adapt to Survive
Introducing the Phoenix Multirotors' first kit: the Adapt! This is a stretched-X frame designed around 5 inch props and the Runcam Mini Swift. The Adapt's concept was to create a competitive frame that's simplistic, yet retains essential features such as motor protection on the arms that other frames tend to leave out. This creates a balance of features that pilots need without any gimmicky extras or going overboard.
.jpg)
The motor layout was inspired by the tried-and-true ImpulseRC Alien with a geometrically superior 3:4:5 layout for increased control and smoother feel. The difference, however, is that the Adapt's arms are in a stretched orientation rather than squashed such as the Alien.
The Adapt uses a top mounted battery for the ultimate in-flight feel and uses 30mm standoffs to provide enough room for the camera and almost any 30.5 x 30.5mm stack. The top plate also incorperates a 2-in-1 VTX antenna slot. For those who prefer to not mount their SMA connector straight out of the top of the frame, a slot has been provided to help keep you antenna away from the rear props while retaining some room for movement in the event of a hard crash. For those who do mount their SMA connector straight out of the top of the frame, the slot is large enough to mount SMA connectors. If you crash, however, the slot will allow movement of the connector to reduce the chance of breakage.
Rather than messing with extra plates, the Adapt uses M3 holes to mount the metal bracket included with the Runcam Mini Swift.
The arms include motor protection in the form of 4 prong-like extrusions giving plently of bracing from any hard hits with gates or trees.
Additional Information
Specs
Weight: 80g
MTM: 220mm
Layout: stretched-X
Battery: top mounted
Recommended Parts
Camera: Runcam Mini Swift
Motors: 22xx or 23xx
FC: any board with 30.5 x 30.5mm mounting
ESC: any 20-35 Amp ESCs
VTX: any 25-600mW VTX
Battery: 1300mAh 4S
Review Section ( Total Review:0 )
No Review Found
