Tinkers Flight
Tinkers R1 - The Hedge Eater (20x20)
Item List
-
TR1 - Key 20x20
Quantity :1
-
TR1 - Cam Plate
Quantity :2
-
TR1 - Top Plate
Quantity :1
-
TR1 - Mid Plate
Quantity :1
-
TR1 - Bottom Plate
Quantity :1
-
TR1 - Arm (5mm)
Quantity :4
Description
[Rev J]
This kit contains the key for 20×20 stacks only. This is the recommended config but if you require 30×30 mounting please see the other kit options!
The Tinkers R1 is the first installation in the Tinkers Race line. Designed as an excellent introductory/intermediate frame it offers great durability while maintaining a reasonably light weight. But these are qualities lots of frames offer. What really sets the Tinkers frames apart are the novel or unique features they offer:
- Camera Protection
- Motor Protection
- Variable stack position (20×20 stacks only)
- single screw arm changes
- anti-wiggle nut and print
- Simple fin mounting solutions
- XT60 tie down
- Novel, compliant print designs
- Space for two battery straps.
As with all Tinker's Frames, a STEP file of the frame is available along with all the print files if you want to design your own parts.
Please note buying this kit from Armattan will only include the carbon parts. Please see below for a full list of hardware requred
Additional Information
Print File Links:
[Coming Soon]
Hardware:
4× 25mm Aluminium Standoff
6× M3 Press-nut
4× M3×16mm
4× M3×10mm
6× M3×5mm
Useful Links:
[Coming Soon]
Review Section ( Total Review:0 )
No Review Found
