Lightweight racing focused quad copters designed by Space Cowboy Drone Design. Our goal is to create designs with the best mix of strength and well thought out component placement rolled into a competitive light weight package.
ATTENTION: SCX-200 V2.1 kits and parts now available.
SCX-200 V2.1 available now! SCX-175 and SCX-230 V2.1 (4" and 6" configurations) are coming very soon too!
ATTENTION: All kits purchased through this store are made to order.
Kits listed here are custom made and are not kept in stock. Expect 7-14 business days for production prior to shipment. Any questions regarding your order should be directed to firstname.lastname@example.org, technical or design questions can be directed to me via the e-mail link in the upper right. If you are looking to get your hands on a SCX-200 quickly please check out Armattan Lite SCX-200 at http://www.armattanquads.com/scx-200/, this version of the frame comes in two brilliant color combos and is stocked directly by Armattan and it's distributors.
Looking for a 6" prop version of the SCX? Here it is!
The SCX-230 is based off the same familiar architecture used in the SCX-200 and shares all the same parts with the exception of lengthened arms to allow for 6" props. SCX-230 comes in two flavors, regular and beefy. This is the beefy version with wider width arms (17mm wide vs 14mm wide of the original SCX-200).
This version allows for cleaner mounting of larger ESCs like the KISS 24A.
SCX-230 V2.1 Frame Kit!
The next refinement of the SCX frame kit makes minor improvements upon the V2 architecture to improve durability and frame fit and finish. The following parts have been revised slightly to create the V2.1 configuration:
SCX V2.1 Base Plate: Now includes more material near camera bumper and cam slots to help distribute impact loads (fully backwards compatible with V2).
SCX V2.1 Top Plate: Revised "dog bone" slots for better positive engagement of vertical accesory plates (backwards compatible with slight mod to V2 VTX Mounting Plate).
SCX V2.1 Camera Plate: Revised tabbing to help improve positive engagement when combined with V2.1 Top Plate (fully backwards compatible with V2)
SCX V2.1 VTX Mounting Plate: Revised tabbing to help improve positive engagement when combined with V2.1 Top Plate (fully backwards compatible with V2)
SCX-230 V2.1 Beefy Arm: Revised arm no longer has material removed near motor nerf bumper for increased impact strength, lengthened for 6" use and widened for bigger ESCs such as KISS 24A and Little Bee 30A (fully backwards compatible with all SCX models).
SCX-230 Key Features:
- 230mm motor to motor, symmetrical X frame
- 4mm thick replaceable arms
- 2mm thick bottom and mid plate
- 1.5mm thick upper plate
- Designed for 220x sized motors and 6" props
- Integrated HS1177 FPV camera mounting plates with 55+ degrees of allowable tilt
For this kit you will need to source your own vtx o-ring! Below are the o-rings which I have tested to work. You can also try your local hardware store, but in general you want an o-ring with a 6mm ID and a 1-1.5mm thickness.
1x..............Square Profile O-ring, 6mm ID, 1.5mm thick (McMaster Carr 1171N142 or equivalent)(optional vtx mounting assembly)
1x..............Square Profile O-ring, 6mm ID, 1mm thick (McMaster Carr 1171N119 or equivalent) (vtx mounting assembly)
Please note this kit includes steel hardware and black anodized aluminum standoffs from Armattan, not purple anodized aluminum as shown in pictures.
General Assembly Guide:
FPV Camera: HS1177 (bottom mount connector version for max tilt)
FPV VTX: UBAD 200mW, Hawkeye 200mW, TS5823, or similar package size.
Power Distribution: Matek PDB, ATAS Sphere PDB, or Lumenier 4Power
Flight Controller: any 30.5x30.5mm mounting should work although a newer Lumenier LUX or Flyduino KISS FC will provide extra clearance for HS1177 camera.
Motors: 220x sized, 16x19mm slotted arms
ESCs: Little Bee 20A or similar work well (arms are same width)
Review Section ( Total Review:0 )
No Review Found