This frame was designed for use with 3 inch propeller, all in one ESC, FC and Vtx. Frame is a stretched X design, measurements between front two motors 90mm, from front to back motor 125mm, from back left to right front 154mm. Motor mounting holes are for 12mm diameter layout with 4 - M2 screw holes such as on the Emax 1306 motors. This frame was designed to have the mini camera and Frsky R-XSR installed on top as shown in the photos with a 3d printed mount. Below is the link for a 3d printed mount that was specifically designed for this purpose.
Review Section ( Total Review:0 )
No Review Found