IMPORTANT: This is a proof of concept design still at this state. Fit of parts have been confirmed but no durability testing has been performed so no claims are being made. Please take this into account if you puchase this frame.

IMPORTANT: This is a carbon plate only kit. No hardware is included and needs to be provided by purchaser.  A single 20mm and 4 15mm standoffs are required. I recommend using 3mm x 8mm screws for attaching standoffs to the bottom plate and a minimum of 3mm x 6mm screws for the top plate and camera plates.

This Quadcopter kit is designed for 3 inch propellers with either a 12MM or 9MM hole spacing, and a Runcam Micro Swift or similar sized camera. This frame has a cut out in the top plate to accomidate an Eachine VTX03 or similar sized VTX. There may be space for a TBS Unify V2/V3 video transmitter with a dipole or an antenna with a CFL connector but it will be tight.

Both the top and bottom plates have chamfered edges. As well the carbon fiber is aligned to run parallel to the direction of the arms on the 3MM thick bottom plate.

For 3D printable accessories check out my Thingiverses page to download the files.