FOR FRAME DETAILS SCROLL TO THE END
SAMPLE COMBO - ULTRALIGHT RACER
I wanted to help new pilots to find perfect sample combo depending on my experience in testing for years.
If you like it please support me by using the affiliate links - thank you in advance! YOU ARE AWESOME!
Motors: BrotherHobby Returner R4 2205 2700KV https://goo.gl/ZHV4u7
ESCs: DYS F20A 20amp 4in1 BLHeli_S ESC https://goo.gl/fNQ84S
Flight Controller: Matek F405-OSD https://goo.gl/y9TnHC
FPV Camera: Runcam Swift Micro https://goo.gl/hnsf7Q
FPV VTX: Matek 5.8G 40CH https://goo.gl/ZqncAf
Propellers: Dalprop Cyclone T5040C https://goo.gl/hYwx54
Lipo: Infinity 1300mah 14.8V 90C 4S1P https://goo.gl/HDr8zm
Radio: FrSky ACCST Taranis Q X7 https://goo.gl/WULYuD
Receiver: Frsky XM+ Micro D16 SBUS Full Range Receiver https://goo.gl/ZeDRNa
QUICK EXCHANGE - TIGHT FIT
Replace arms in seconds without releasing the whole electronics stack. Tight fit screw holes prevent wobbling.
ADJUSTABLE CAMERA POSITION
Choose your camera position to have enought uptilt and space to your electronics.
PRESS NUTS ARE BETTER
Change your arms without releasing or losening your nuts. No need for an extra tool.
LOW SMA MOUNT
Mount your antenna lower, inbetween your fc stack and get more protection.
MADE FRESH TO ORDER
TWO WEEKS UNTIL SHIPPING
layout: true-x splitbody
propeller: up to 5.1 inch, 207mm motor to motor
spacer height: 25mm
arms: 3mm thick tapered 14-11mm wide
motor mount: 16x19mm bolt circle 3mm
top- and side- and backplate: 2mm carbon fiber
sandwich: 1.5mm carbon fiber
No Review Found