Crash N Burn Racing

Welcome to the Crash N Burn Racing store.  Here you will find multirotor frames that have been extensively developed to provide the smoothest assembly process possible.  When a frame is listed for sale it has been designed, built, redesigned and built again until it is as perfect as possible.

Each build has a recommended parts list to take the guess work out of what parts will fit.  If you’re looking for a well thought out quad that has been built and engineered by an experienced builder and FPV racer you are in the right place.

CBS 160 Kit

Price : $ 31.49

Propeller size : 3"


This is a 160 stretch frame designed for the Run Cam Swift Mini and Pico sized Flight Controllers such as the Piko BLX.  It weighs in at 40.6 grams and is designed to run 1407 or similar sized brushless motors.  This frame has been fully built and tested with the Piko BLX and Innova video transmitter.  This is a very light yet durable frame with great camera protection. Fully assembled with the reccomended parts the build should be 160g to 170g and paired with a Tattu 650mah 4s the total weight will be under 250g.  This frame shares all parts with the CBX150 and CBX180 with exception of the bottom plate so if you want to switch to a 180X or a 150X size all you need is a new bottom plate.

*Note* This frame is made to order, processing usually takes 1 week and another 2 weeks for shipping.

Recommended parts:

  • Camera: Run Cam Swift Mini or Foxeer Arrow
  • Motors: Brother Hobby/Rotorgeeks1407 3600kv motors, Rotorgeeks are 1.5 gramslighter per motor.
  • Flight Controller: Piko BLX
  • Video Transmitter: Innova OSD. Eachine VTX03, Aomway TX001, ImmersionRC Tramp or any small vtx can be mounted with the included adapter plate.
  • ESC: 12 amp Emax Bullets, these are very short ECS's to provide more room for mounting on the arm.
  • Lipo: 650-850mah 4s
  • Props: 3045 triblades

The body is much narrower than other micro sized frames resulting in less wind resistance.


Camera mounts also provide excellent camera protection.


This is a stretch X frame to give improved pitch angle performance to help maintain elevation.


The narrow body along with a 12A Emax bullet esc leaves plenty of room for wires.


Lots of room for stacking components and the camera does not interfere.


Adapter plate to mount non-stackable VTX.


Review Section ( Total Review:1 )

Image Ted Brock

Build is clean and assembles easily and very solidly, total weigh with 1306 X 3600 motors, dshot 12a esc's, and osd at 152g with the camera completely protected what's not to love?

Related Products

Falcon Acro 230 V2 Kit


CODX 240


Craze 310 Frame Kit