DFR Frames
Item List
Description
Description
This is a vertical arms PROTOTIPE frame, it is quite light and strong, as all my 5" frames, it is compatible almost with every 36x36 stack and 16-19 mounting hole motors; contrary to his brother, "The racer", he doesn't need SFGs because he already has vertical arms and this makes it very stable and accurate.
As the racer, all the frame is constantly improved; working with pilots i can guarantee them a relaiable and performing frame.
N.B. This frame is in development right now so i recommend you to wait the definitive version!
If you have a 3D printer or you can print 3D models you can find all the "extra components" (cam mount, finn, antenna mount and sfg supports) on my thingivers:
https://www.thingiverse.com/Difo_96/designs
NOTE: In the kit the TOP PLATE is the "SLIM" plate (as in the photo) and NOT the "Standard" plate, if you want a little bit of protection you can buy the "standard" plate as in the Racer!
Frame specification:
Weight: 59g (carbon) / 80g (carbon+hardware)
Wheelbase: 210mm
Total height: 49mm Housing height: 25mm
Arms: 4x14mm
Bottom plate thickness: 2mm
Central, top and side plates thickness: 2mm
"DFR One Finger" stretched X
Compatibility:
Alle 36x36 stacks
All motors with 16-19 mounting holes
All micro and nano cameras (*if you print the cam mount you can only use 12mm lenses)
Tips:
For an easyer assembly i advise you to sand a little bit all the joints
Be carefull sanding the joints, the carbon fiber is very toxic!
Additional Information
Review Section ( Total Review:0 )
No Review Found