Hatfield Flightcraft

I design stuff primarily for my own enjoyment I hope you will enjoy my designs as well. My designs have only minimal testing before being released in the store. I make no claims to the performance or durability of the frames sold in this store. However, I do my best to design something others might also enjoy building and flying. Any positive feedback will be greatly appreciated.

Please follow me on Facebook at www.facebook.com/Hatfield.Flight/ to see what I am currently working on.

ASP-S65 - 150MM Stretch X - Alpha Test


Description

IMPORTANT:  This is an Alpha release. Nothing beyond 3D printed parts, for checking fit, have been made at this point. Kits with updated parts will be posted as changes are necessary and I will do my best to make upgraded parts fit previous iteration of this kit but cannot guarantee that any changes made will be fully backwards compatible.

IMPORTANT:  This is a carbon only kit. All hardware and accessories will need to be provided by the builder to finish the kit.

Micro quadcopter kit designed around the 11XX brushless motors and 2.5 inch propellers. It is designed to hold a Runcam Mirco Swift/Swift 2 or similar sized camera with a Eachine VTX03 or similar design video transmitter. The bottom plate has chamfered edges and the carbon fiber has been orientated to run parallel to the direction of the arms on the bottom plate.

The frame allows for the mounting of either a 20x20mm flight controller or a smaller 16x16mm one.   The kit requires 5 M2 x 20mm standoffs. Ten M2 x 6MM screws will also need to be supplied by the builder. A battery strap will also be required.

 

All up frame weight is expected to be around 22g depending on the hardware chosen to complete the build.

 

Review Section ( Total Review:0 )

No Review Found