*** Untested Prototype *** I will update this as soon as the first samples arrive for me to test!
This kit contains left and right side plates for the Fullspeed RC Leader 120 quad to allow for fitting a micro CCD camera with backback TX with a good tilt range plus a larger LED/buzzer board.
This also allows room for a triple stack and the arms have been beefed up a little also. Enjoy!
You need a left and right because a section of the camera mount arm is 0.5mm thinner on the inside edge to allow for the 19mm wide camera to fit in the 18mm gap between the plated when mounted on the standard frame.
No Review Found